1997 Fiat Ducato

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Front Windscreen washer not working (3.5 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back leaf spring mount area (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back leaf spring mount area (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened also lower arms corroded (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive front leaf spring mounting (5.3.6 (a) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive in arch (5.3.6 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill and step (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive front leaf spring mount (5.3.6 (a) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Shock absorbers has a slightly worn bush all (5.3.2 (c))

front radiator support x member corroded

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in arch (5.3.6 (a) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting area (5.3.6 (a) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step (6.1.1 (c) (i))

Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mounting area (5.3.6 (a) (i))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive leaf spring brackets (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive in arch (5.3.6 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive left spring brackets (5.3.6 (a) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Sub-frame corroded but not seriously weakened also front suspension parts corroded (5.3.3 (b) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust system insecure (6.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b))

Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))

Nearside Rear Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear Bumper insecure (6.1.4 (a) (i))

Spare wheel carrier insecure (6.1.5 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced front radiator mount (6.1.1 (c) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting subframe mount inner wheel arch (6.2.2 (d) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Road wheel fixing missing (5.2.1 (a) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting spring hanger (6.2.2 (d) (i))

Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i))

Offside Front Side repeater not working (4.4.1 (a) (ii))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting spring hanger (6.2.2 (d) (i))

Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Service brake excessively fluctuating both rear (1.2.1 (e))

Windscreen washer not working (3.5 (a))

Nearside Front Integral body structure has excessive corrosion which adversely affects braking or steering inner strut turret (6.1.1 (c) (ii)) DANGEROUS

Integral body structure is corroded but structural rigidity is not significantly reduced front crossmember (6.1.1 (c) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced underside of step (6.1.1 (c) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Brake performance not tested engine over heating (1.2.1 (g))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Emissions not tested engine misfiring (7.3.A.1)

Offside Side repeater not working (1.4.A.2c)

Offside front brake binding (3.7.B.1)

Rear Shock absorber has slight corrosion to the casing both (2.7.2a)

all front suspension components corroded

underside of vehicle showing signs of corrosion

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Stop lamp not working (1.2.1b)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Power steering pipe(s) or hose(s) leaking from a joint (2.3.3b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Rear Shock absorber has slight corrosion to the casing both (2.7.2a)

all front suspension components corroded

underside of vehicle showing signs of corrosion

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Vehicle structure has slight corrosion (6.1.B.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Vehicle structure has slight corrosion (6.1.B.2)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger (6.1.B.2)

Nearside Front front brake binding (3.7.B.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sills underbody (6.1.B.2)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger (6.1.B.2)

Offside Front front brake binding (3.7.B.1)

Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill underbody (6.1.B.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Suspension spring mounting prescribed area is excessively corroded valance (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

handbrake cables frayed

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Side repeater not working (1.4.A.2c)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Stop lamp damaged, but still visible from a reasonable distance (1.2.1d)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension spring mounting prescribed area repaired, but not inappropriately (2.4.A.3)

Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

rear outer valaces corroded and holed

both hand-brake cables rubbing on tyres

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Nearside Front Lower Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Upper Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b) DANGEROUS

Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d) DANGEROUS

Nearside Stop lamp emits other than a steady red light (1.2.1e) DANGEROUS

Offside Front Brake pipe leaking (3.6.A.1) DANGEROUS

Service brake: efficiency below requirements (3.7.B.7) DANGEROUS

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Stop lamp damaged, but still visible from a reasonable distance (1.2.1d)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

rear outer valaces corroded and holed

both hand-brake cables rubbing on tyres

Nearside Stop lamp damaged, but still visible from a reasonable distance (1.2.1d)

Offside Front wheel bearing has slight play (2.5.A.3c)

front tyres worn at edges

o/s sill holed at centre above ex tail pipe

previous welded repairs to sills

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Rear Statutory seat belt missing (5.1.1)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Stop lamp excessively damaged so that it is not visible from a reasonable distance (1.2.1d)

Nearside Stop lamp has a product on the lens so it is not visible from a reasonable distance (1.2.1d)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

front tyres worn at edges

o/s sill holed at centre above ex tail pipe

previous welded repairs to sills

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front wheel bearing has slight play (2.5.A.3c)

front b/discs worn and corroded

front b/pipes painted over

n/s/r light lens taped repair

various welded repairs to both sills , holed o/s above ex

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Upper Rear position lamp(s) not working (1.1.A.3b)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Stop lamp not working (1.2.1b) DANGEROUS

Offside Stop lamp not working (1.2.1b) DANGEROUS

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

rear brake application uneven (3.7.B.2) DANGEROUS

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Stop lamp damaged, but still visible from a reasonable distance (1.2.1d)

Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside front brake grabbing slightly (3.7.A.2b)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Power steering pump has slight seepage from a component (2.3.3b)

front brake application slightly uneven

front discs badly worn and corroded

holed and corroded o/s sill centre

n/s hand-brake poor

welded repairs n/s sill

welded repairs to o/s rear outer valance and sill

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Rear wheel bearing has slight play (2.6.2)

front and rear brake application slightly uneven

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Rear wheel bearing has slight play (2.6.2)

front and rear brake application slightly uneven

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

nearside front chassis corroded

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

nearside front chassis corroded

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS

Brakes imbalanced across an axle (3.7.B.5b)

Offside Inner Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

off sied sill wekinig at center

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Rear Shock absorber has a serious fluid leak (2.7.3)

Horn not working (1.6.2a) DANGEROUS