1998 Kawasaki ZX-7R

Rear Rear reflector on motorcycle missing (1.4.1)

Exhaust mounting deteriorated. (7.1.1.c)

Offside Front Front shock absorber has light misting of stanchion (2.3.3)

Horn not working (1.7.3a)

Offside Direction indicator not working (1.5.1c)

Registration plate delaminated (6.3.1.d)

Exhaust mounting deteriorated. (7.1.1.c)

Offside Front Front shock absorber has light misting of stanchion (2.3.3)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Wheel has a slightly eccentric bead rim. (4.2.2)

Nearside Front Brake disc(s) slightly pitted (3.2.A1l)

Nearside Front Brake disc(s) slightly worn (3.2.A1l)

Offside Front Brake disc(s) slightly pitted (3.2.A1l)

Offside Front Brake disc(s) slightly worn (3.2.A1l)

Oil leak

Steering headbearing has slight free play (2.2.2)

Wheel alignment slightly misaligned. (2.5.1)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars (2.1.2b)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain slightly tight (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Wheel has a slightly eccentric bead rim. (4.2.2)

Nearside Front Brake disc(s) slightly pitted (3.2.A1l)

Nearside Front Brake disc(s) slightly worn (3.2.A1l)

Offside Front Brake disc(s) slightly pitted (3.2.A1l)

Offside Front Brake disc(s) slightly worn (3.2.A1l)

Oil leak

Steering headbearing has slight free play (2.2.2)

Wheel alignment slightly misaligned. (2.5.1)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Offside Handlebar deformed (2.1.1b)

Rear Brake disc(s) excessively scored (3.2.A1l)

Rear Brake fluid reservoir fluid level dangerously low (3.2.B1d)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Rear reflector on motorcycle missing (1.4.1)

Rear suspension fouling which affects the movement of the rear suspension (2.4.A.3a)

Registration plate with character(s) which are not the correct height (6.3.4a)

Registration plate with character(s) which are not the correct width (6.3.4a)

Drive chain excessively tight (6.2.1d) DANGEROUS

Nearside Front shock absorber seal failed and leaking oil (2.3.3) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i)) DANGEROUS

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Wheel has a slightly eccentric bead rim. (4.2.2)

Lower Rear suspension bush has slight free play (2.4.A2a(i))

Nearside Front Brake disc(s) slightly worn (3.2.A1l)

Offside Front Brake disc(s) slightly worn (3.2.A1l)

Oil leak

Rear Brake disc(s) slightly worn (3.2.A1l)

Steering headbearing has slight free play (2.2.2)

fairing slightly insecure

Front Horn not working (1.7.3a)

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Drive chain sprocket worn to excess (6.2.1e)

Drive chain worn to excess (6.2.1e)

Front All position lamps do not illuminate immediately when switched on (1.1.3a)

Front Front mudguard insecure (2.3.7)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front shock absorber seal failed and leaking oil (2.3.3)

Rear Chain guard insecure (6.2.1c)

Rear Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear Rear reflector on motorcycle missing (1.4.1)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))