MOT Status
ExpiredMileage
155,799 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Headlamp aim too high (1.8)
Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Headlamp aim too low (1.8)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
o/s/f floor ban corroded but not holed
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
o/s/f floor pan corroded
Centre Rear Seat belt retracting mechanism defective (5.2.5b)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
o/s/f to rear brake pipe corroded
exhaust system heavily corroded
n/s/f wheel inner rim damaged
o/s/r brake pipe corroded but covered in grease. Unable to fully inspect.
wipers poor
How Reliable is the Rover 416?
Based on 648,418 MOT tests across 110,608 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R271 JWV is a 1998 Rover 416 in Green with a 1,589cc petrol engine. This vehicle has been through 12 MOT tests with a personal pass rate of 66.7%.
Across all 1998 Rover 416 models, the average MOT pass rate is 66.4% with a typical mileage of 73,143 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Rover 416 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 47,498 recorded failures. If you're considering buying R271 JWV, it's worth having these areas checked by a mechanic before committing.
The Rover 416 typically stays on UK roads for around 35 years. At 28 years old, this Rover 416 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of R271 JWV?
You can check the full history of R271 JWV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R271 JWV registered?
R271 JWV is a 1998 Rover 416, first registered on 25 February 1998.
Is R271 JWV safe to buy?
The MOT history for R271 JWV shows 12 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R271 JWV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R271 JWV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.