1998 Ford Ka

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Headlamp aim too low (1.8)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside rear brake recording little or no effort (3.7.B.5a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp aim too low (1.8)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Stop lamp not working (1.2.1b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Suspension joint nearside lower dust cover split/missing

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

slight corrosion front cross member

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

both sills badly corroded

inlet air temperature sensor wires damaged

nearside inner c.v boot insecure

Nearside Front Brake hose twisted (3.6.B.4c)

Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Brake hose excessively deteriorated (3.6.B.4d)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

both sills badly corroded

inlet air temperature sensor wires damaged

nearside inner c.v boot insecure

Headlamp aim too low (1.8)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Registration plate lamp not working (1.1.C.1d)

n/s sill corroding

Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Brake hose excessively deteriorated (3.6.B.4d)

Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

odd size tyres fitted to rear axle 165/80/13 front axle 155/80/13