MOT Status
ExpiredMileage
77,538 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)
Front registration plate deteriorated (6.3.1d)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Rear Parking brake lever has no reserve travel (3.1.6b)
Rear rear brake recording little or no effort (3.7.B.5a)
Rear rear parking brake recording little or no effort (3.7.B.6a)
Steering system excessively tight (2.2.D.1)
Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
corrosion loacated on vehicle chassis/underbody
corrosion located on both inner and outter sills.
corrosion located on vehicle suspension
gas leak from exhaust joins
oil leak located from vehicle engine.
Nearside Rear Rear wheel bearing rough when rotated (2.6.1)
Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Steering system excessively tight (2.2.D.1)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
both rear and o/s/f tyres starting to crack
Nearside Rear Subframe mounting prescribed area is inadequately repaired (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Subframe mounting prescribed area is inadequately repaired (2.4.A.3)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
both rear and o/s/f tyres starting to crack
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear coil spring corroded (2.4.C.1b)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Lower Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear coil spring corroded (2.4.C.1b)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear coil spring corroded (2.4.C.1b)
corrosion at nearside front floor
corrosion at offside front floor
corrosion at offside rear inner sil
corrosion down both sils
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear coil spring corroded (2.4.C.1b)
corrosion at nearside front floor
corrosion at offside front floor
corrosion at offside rear inner sil
corrosion down both sils
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
interior mirror not fitted (fallen off)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front Brake hose excessively damaged (3.6.B.4d)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R290 BOA is a 1998 Ford Ka in Red with a 1,299cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 60%.
Across all 1998 Ford Ka models, the average MOT pass rate is 62.2% with a typical mileage of 62,348 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying R290 BOA, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 28 years old, this Ford Ka is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of R290 BOA?
You can check the full history of R290 BOA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R290 BOA registered?
R290 BOA is a 1998 Ford Ka, first registered on 31 March 1998.
Is R290 BOA safe to buy?
The MOT history for R290 BOA shows 15 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R290 BOA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R290 BOA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.