1997 Mazda 626

Nearside Front Suspension component mounting prescribed area is excessively corroded as chalked (2.4.A.3)

Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill as chalkes (5.2.6)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill as chalked (5.2.6)

Offside Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Body has a sharp edge caused by corrosion both wheel arches (6.1.C.1)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Lower suspension arm corroded

front and rear suspension components corroded

n/s and o/s/r outer sills corroded but not considered excessive

Front Suspension arm corroded but not seriously weakened Both sides (2.4.G.1)

Nearside Front Macpherson strut worn but not seriously weakened (2.4.G.1)

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear Both tyres deteriorating

Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement Both sides (2.4.G.2)

Rear brake disc worn, pitted or scored, but not seriously weakened Both sides (3.5.1i)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded SILL (2.4.A.3)

Offside Front brake caliper securing device excessively deteriorated (3.5.1j)

Offside Rear Suspension component mounting prescribed area is excessively corroded SILL/ARCH X2 (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Headlamp not working on dipped beam BOTH (1.7.5a) DANGEROUS

Front Suspension arm corroded but not seriously weakened Both sides (2.4.G.1)

Nearside Front Macpherson strut worn but not seriously weakened (2.4.G.1)

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear Both tyres deteriorating

Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement Both sides (2.4.G.2)

Rear brake disc worn, pitted or scored, but not seriously weakened Both sides (3.5.1i)

Both rear wheel arches h/s/corrosion.

Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Offside Front Direction indicator not working (1.4.A.2c)

Offside Front Side repeater not working (1.4.A.2c)

Offside Rear Direction indicator not working (1.4.A.2c)

Both rear wheel arches h/s/corrosion.

Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

both rear wheel arches and rear outer sills corroded,

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

both rear wheel arches and rear outer sills corroded

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Nearside Inner Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Inner Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Rear Passenger's seat cannot be secured in the upright position. (6.2.A.2)

Offside Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Inner Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Rear brake disc slightly pitted (3.5.1h)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Inner Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear brake disc slightly pitted (3.5.1h)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc slightly pitted (3.5.1h)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc slightly pitted (3.5.1h)