2013 Mini Cooper S

Front Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened Including various associated components (5.3.3 (b) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))

Rear Passenger seat(s) missing at time of test ()

Rear Sub-frame corroded but not seriously weakened Including various associated components (5.3.3 (b) (i))

Offside Side repeater not working (4.4.1 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened Including various associated components (5.3.3 (b) (i))

Nearside Side repeater with a multiple light source up to 1/2 not functioning (4.4.1 (a) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))

Rear Passenger seat(s) missing at time of test ()

Rear Sub-frame corroded but not seriously weakened Including various associated components (5.3.3 (b) (i))

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened Including associated components (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Passenger seat(s) missing at time of test ()

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Windscreen excessively tinted but not adversely affecting driver's view (3.2 (b) (i))

Emissions oxygen sensor obviously modified Spacer fitted to secondary sensor (8.2.1.1 (a))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust catalytic converter missing where one was fitted as standard (8.2.1.1 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Windscreen washer not working (3.5 (a))

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened Including associated components (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Passenger seat(s) missing at time of test ()

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Windscreen excessively tinted but not adversely affecting driver's view (3.2 (b) (i))

Exhaust noisy (8.1.1 (a))

Rear Passenger seat(s) missing at time of test ()

Windscreen excessively tinted but not adversely affecting driver's view (3.2 (b) (i))

Emissions oxygen sensor obviously modified Secondary sensor fitted with a spacer (8.2.1.1 (a))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust catalytic converter missing where one was fitted as standard (8.2.1.1 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Headlamps matched pair are not the same colour (4.1.4 (d))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Headlamp aim too high (4.1.2 (a))

Exhaust noisy (8.1.1 (a))

Rear Passenger seat(s) missing at time of test ()

Windscreen excessively tinted but not adversely affecting driver's view (3.2 (b) (i))

Front brake upgrade fitted

bradded flex brake pipes fitted x4

coil over suspension fitted all round

l/h and r/h indicator repetor lamps, tinted but not affecting light output

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))