1998 Honda C90

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Drive chain sprocket carrier worn to excess (6.2.1e)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front suspension assembly excessive wear or free play in a front suspension component (2.3.4)

Front wheel bearings have excessive free play (2.3.5b)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Nearside Position lamp switch insecure (1.1.4b)

Offside Front Direction indicator insecure (1.5.3b)

Position lamp switch faulty (1.1.4a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Front suspension assembly excessive wear or free play in a front suspension component (2.3.4)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Registration plate deteriorated (6.3.1d)

Drive chain excessively loose (6.2.1d)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Front suspension assembly excessive wear or free play in a front suspension component (2.3.4)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear Brake lining(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Drive chain excessively loose (6.2.1d)

Front Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Front Tyre valve stem misaligned which could cause sudden tyre deflation (4.1.2c)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Nearside Rear Direction indicator obscured (1.5.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Wheel has an excessively distorted bead rim. (4.2.2)

Stop lamp remains on when the brake is released (1.3.1e)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) DANGEROUS

Front Fairings insecure and likely to impede the steering (2.1.2e)

Rear Rear shock absorber has inadequate damping effect. (2.4.A.3b)