1998 Fiat Barchetta

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Exhaust system insecure (6.1.2 (a))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Anti-roll bar attachment bracket/mounting insecure (5.3.3 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Offside Rear Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Rear Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Rear Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

corrosion in floorpan

offside rear footbrake effort lower than nearside rear,advise closer inspection

Front coil spring corroded (2.4.C.1b)

Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear coil spring corroded (2.4.C.1b)

front brake fluctuating, but not excessively (3.7.B.3)

offside rear inner wheel arch damaged

radiator support bracket corroded

rear suspension components corrosion

Nearside Front Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Front coil spring corroded (2.4.C.1b)

Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear coil spring corroded (2.4.C.1b)

front brake fluctuating, but not excessively (3.7.B.3)

offside rear inner wheel arch damaged

radiator support bracket corroded

rear suspension components corrosion

Bonnet cannot be secured in the closed position (8.4.1)

Offside Rear fog lamp not working (1.3.2b)

Offside rear brake application uneven (3.7.B.2)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Nearside Rear Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

front brake fluctuating, but not excessively (3.7.B.3)

rear brake fluctuating, but not excessively (3.7.B.3)

slight corrosion to both front and rear floors

Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Parking brake: efficiency below requirements (3.7.B.7)

Rear brake pads wearing thin

Steering column top bearing slightly worn (2.1.2c)

Brake load sensing valve linkage seized (3.6.E.3)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Steering column top bearing slightly worn (2.1.2c)

Brake load sensing valve linkage stiff (3.6.E.3)

Nail in nearside front tyre

Nearside Front Tyre worn close to the legal limit (4.1.E.1)