1998 Mercedes-benz Vito

Brake pedal wearing smooth

Front Suspension arm pin or bush worn but not resulting in excessive movement Both rear bushes (5.3.4 (a) (i))

Play in steering rack inner joint

Rear Tyre worn close to legal limit/worn on edge Both rears (5.2.3 (e))

Both rear tyres worn smooth on outer edge

Brake pedal wearing smooth (1.1.2 (c))

Play in steering rack inner joint(s) ()

Nearside Front Sub-frame pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside front jacking point is corroded

Offside Front Sub-frame pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened inner face (1.1.14 (a) (ii))

Offside front shock absorber top mounting area is corroded

Oil leak, but not excessive (8.4.1 (a) (i))

Welding repairs covered in underseal

Nearside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg near subframe mounting (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill near trailing arm mount (5.3.6 (a) (i))

Offside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near strut turret (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill near trailing arm mount (5.3.6 (a) (i))

Offside Side repeater not working (4.4.1 (a) (ii))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened inner face (1.1.14 (a) (ii))

Offside front upper shocker mount area corroded

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive n/s/r and o/s/r sill backs by trailing arms (2.4.A.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Suspension component mounting prescribed area is corroded but not considered excessive n/s/r and o/s/r sill backs by trailing arms (2.4.A.3)

Brake load sensing valve stiff (3.6.E.3)

Front front brake fluctuating, but not excessively (3.7.B.3)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Headlamp deteriorated but light output not reduced Moisture Inside Nearside Headlamp Lens (1.7.5a)

Nearside Front Jacking Point Rusted & Weakened

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Rear rear brake fluctuating, but not excessively (3.7.B.3)

brake disc worn, pitted or scored, but not seriously weakened both front (3.5.1i)

brake disc worn, pitted or scored, but not seriously weakened both rear (3.5.1i)

coil spring corroded both front (2.4.C.1b)

coil spring corroded both rear (2.4.C.1b)

o/s/r brake has slight bind

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Headlamp not working on main beam (1.7.5a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Brake load sensing valve stiff (3.6.E.3)

Front front brake fluctuating, but not excessively (3.7.B.3)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Headlamp deteriorated but light output not reduced Moisture Inside Nearside Headlamp Lens (1.7.5a)

Nearside Front Jacking Point Rusted & Weakened

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Rear rear brake fluctuating, but not excessively (3.7.B.3)

brake disc worn, pitted or scored, but not seriously weakened both front (3.5.1i)

brake disc worn, pitted or scored, but not seriously weakened both rear (3.5.1i)

coil spring corroded both front (2.4.C.1b)

coil spring corroded both rear (2.4.C.1b)

o/s/r brake has slight bind

Moisture Inside Nearside Headlamp Lens

Nearside Front Jacking Point Rusted & Weakened

Rear Brake Discs Are Rusting

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Steering rack gaiter split (2.2.D.2d)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a) DANGEROUS

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Moisture Inside Nearside Headlamp Lens

Nearside Front Jacking Point Rusted & Weakened

Rear Brake Discs Are Very Rusted

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Vehicle structure has slight corrosion (6.1.B.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

n/s rear brake disc

Emissions not tested (7.0)

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

n/s rear brake disc

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too low (1.8)

Offside rear brake binding (3.7.B.1)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Exhaust has a part missing (7.1.1a)

Registration plate lamp not working (1.1.C.1d)

Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

bodywork rough

o/s rear lamp lense cracked

rough edges on all doors

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Rear Brake hose slightly deteriorated (3.6.B.4d)

both inner driveshaft boots split

front subframe bushes worn

heavy corosion on underside and susp/parts

rear brake pads look low

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

rear brake pads look low

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Rear Brake hose slightly deteriorated (3.6.B.4d)

both inner driveshaft boots split

front subframe bushes worn

heavy corosion on underside and susp/parts

Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc slightly pitted (3.5.1h)

Vehicle structure has slight corrosion (6.1.A.1)

offside inner cv boot split

rear steel brake pipes slightly corroded

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc slightly pitted (3.5.1h)

Vehicle structure has slight corrosion (6.1.A.1)

offside inner cv boot split

rear steel brake pipes slightly corroded

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside mirror glass cracked

Nearside rear brake grabbing slightly (3.7.A.5b)

Offside inner constant velocity boot split

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside mirror glass cracked

Nearside rear brake grabbing slightly (3.7.A.5b)

Offside inner constant velocity boot split

Nearside Front brake disc slightly pitted (3.5.1h)

Offside Front brake disc slightly pitted (3.5.1h)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Rear Brake load sensing valve linkage stiff (3.6.E.3)

travel on handbrake