2009 Mazda Bongo Friendee

Coil spring corroded all (5.3.1 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Upper Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive cill panels corroded (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive underside (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

all wheel arches taped

Brake pedal wearing smooth (1.1.2 (c))

Nearside Rear Upper Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Rear Lower Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear lamp damaged

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill panels corroded (5.3.6 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Exhaust emissions exceed default limit of 1.5m-1 (8.2.2.2 (b))

Nearside Front Lower Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength behind lower arm rear mounting (5.3.6 (a) (i))

Brake pedal wearing smooth (1.1.2 (c))

Nearside Rear Upper Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Rear Lower Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear lamp damaged

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill panels corroded (5.3.6 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Body corrosion

Service brake binding but not excessively O/S Front and N/S Rear (1.2.1 (f))

Tyre worn close to legal limit/worn on edge All tyres close to limit (5.2.3 (e))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Spare tyre defective ()

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Front Position lamp not working lens is full of water (4.2.1 (a) (ii))

Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced central side sill (6.1.1 (c) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced central side sill (6.1.1 (c) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Spare tyre defective ()

Nearside Front Inner sill corroding

Nearside Inner sill corroding centre

Offside Front Inner sill corroding

Offside Inner sill corroding center

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Front Inner sill corroding

Nearside Inner sill corroding centre

Offside Front Inner sill corroding

Offside Inner sill corroding center

Coolant leak ()

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting seal (6.2.2 (d) (i))

Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Headlamp aim too low (4.1.2 (a))

Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting seal (6.2.2 (d) (i))

Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting seal (6.2.2 (d) (i))

Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i))

Offside Windscreen washer provides insufficient washer liquid (3.5 (a))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

All undersides component/Prescribed areas slightly corroded

Brake disc worn, pitted or scored, but not seriously weakened ALL (1.1.14 (a) (ii))

Front Service brake binding but not excessively both sides (1.2.1 (f))

Front Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b))

All undersides component/Prescribed areas slightly corroded

Brake disc worn, pitted or scored, but not seriously weakened ALL (1.1.14 (a) (ii))

Front Service brake binding but not excessively both sides (1.2.1 (f))

Front Tyre slightly damaged/cracking or perishing both sides (5.2.3 (d) (ii))

Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Inner Body has slight corrosion and outer sills

Nearside Front and offside front brake discs slight corrosion

Offside Rear indictor lens slightly damadge

Offside Rear wheel arch slightly corroded

Central Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)

Inner Body has slight corrosion and outer sills (6.1.B.2)

Nearside Front and offside front brake discs slight corrosion

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened and offside rear corroded (3.5.1i)

Central Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened and corroded (3.5.1i)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Offside Rear fog lamp emits a light other than red (1.3.2e)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Under-trays fitted obscuring some underside components

Rear Exhaust has a major leak of exhaust gases (7.1.2)