MOT Status
ExpiredMileage
198,267 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
General underbody corrosion
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced Wheel arch (6.1.1 (c) (i))
Nearside Front Outer Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Exhaust has a major leak of exhaust gases Rear flexi pipe (6.1.2 (a))
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch (6.1.1 (c) (i))
Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))
General underbody corrosion
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced Wheel arch (6.1.1 (c) (i))
Nearside Front Outer Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Underbody corroding
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Side repeater lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii))
Offside Front Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS
Nearside Side repeater not working (4.4.1 (a) (ii))
Underbody corroding
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
underbody corroded
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
underbody corroded
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch area (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength above axle (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch area (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength above axle (5.3.6 (a) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Power steering inoperative and steering adversely affected (2.1.5 (c) (ii)) DANGEROUS
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Advise under body corrosion various parts.
Advise front cross member corroded and holed both sides.
Nearside Front Inner Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Outer Brake pad(s) less than 1.5 mm thick (3.5.1g)
Advise front lower cross member corroded and holed both sides.
front cross member corroded
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Stop lamp not working (1.2.1b)
Rear fog lamp not working (1.3.2b)
front cross member corroded
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
front cross member corroded
Exhaust system not adequately supported back box (7.1.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Rear fog lamp not working (1.3.2b)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
front cross member corroded
nearside font tyre age cracking
nearside front tyre worn on outer edge
offside front tyre age cracking
Advise nearside rear tyre cracking to outer wall and offside rear tyre cracking to inner wall
Advise rear section exhaust corroded
Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Advise all four tyres slightly perished.
Advise battery tray corroded offside front.
Advise coolant comming out of over flow
Advise offside rear side inner sill corroded.
Front brake drum worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Inner Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Inner Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Body has slight corrosion (6.1.B.2)
Offside Front Body has slight corrosion (6.1.B.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Body has slight corrosion (6.1.B.2)
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Exhaust has a major leak of exhaust gases (7.1.2)
Offside Front Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Body has slight corrosion (6.1.B.2)
Offside Front Body has slight corrosion (6.1.B.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Body has slight corrosion (6.1.B.2)
travel in handbrake
Centre Exhaust has part of the system excessively deteriorated (7.1.1a)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Headlamp aim too high (1.8)
o/s sill lip damaged slightly @ front
Offside Rear fog lamp not working (1.3.2b)
o/s sill lip damaged slightly @ front
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Rear Rear wheel bearing has slight play (2.6.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R386 YJU is a 2006 Mazda Bongo in White with a 2,498cc diesel engine. This vehicle has been through 25 MOT tests with a personal pass rate of 56%.
Across all 2006 Mazda Bongo models, the average MOT pass rate is 66.5% with a typical mileage of 130,909 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying R386 YJU, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 20 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of R386 YJU?
You can check the full history of R386 YJU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R386 YJU registered?
R386 YJU is a 2006 Mazda Bongo, first registered on 1 November 2006.
Is R386 YJU safe to buy?
The MOT history for R386 YJU shows 25 tests with a 56% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R386 YJU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R386 YJU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.