MOT Status
ExpiredMileage
90,610 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Centre Exhaust system not adequately supported (7.1.1)
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear coil spring fractured (2.4.C.1a)
Offside Rear Vehicle structure has slight corrosion (6.1.B.2)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
both front tyers inner edge scrubbed
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Vehicle structure has slight corrosion (6.1.A.1)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Nearside Rear Stop lamp not working (1.2.1b)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Headlamp aim too low (1.8)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Vehicle structure has slight corrosion (6.1.A.1)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Headlamp aim too low (1.8)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Ball joint has excessive play (2.2.B.1f)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R399 YWG is a 1998 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 11 MOT tests with a personal pass rate of 54.5%.
Across all 1998 Ford Ka models, the average MOT pass rate is 62.2% with a typical mileage of 62,348 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying R399 YWG, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 28 years old, this Ford Ka is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of R399 YWG?
You can check the full history of R399 YWG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R399 YWG registered?
R399 YWG is a 1998 Ford Ka, first registered on 23 February 1998.
Is R399 YWG safe to buy?
The MOT history for R399 YWG shows 11 tests with a 54.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R399 YWG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R399 YWG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.