1998 Isuzu Trooper

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Outer sill corroded

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear coil spring corroded (2.4.C.1b)

Nearside Rear inner sill

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Inner sill corroded

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear coil spring corroded (2.4.C.1b)

Offside Rear light lens deteriorated/dirty

Rear Chassis heavily corroded

Rear panard rod mounting corroded

Tow bar removed at time of test

corrosion and minor leaks to exhaust system

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded OUTER SILL (5.2.6)

Nearside Rear Stop lamp emits other than a steady red light WHITE TO REAR (1.2.1e)

Offside Rear Seat belt anchorage prescribed area is excessively corroded OUTER SILL (5.2.6)

Offside Rear Brake pad(s) less than 1.5 mm thick PAD MISSING WORN AWAY (3.5.1g) DANGEROUS

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Stop lamp not working (1.2.1b)

Parking brake lever has no reserve travel (3.1.6b)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Vehicle structure has slight corrosion (6.1.A.1)

Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (7.1.4)

Nearside Front Headlamp aim too high (1.8)

Nearside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Headlamp aim too high (1.8)

Offside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Brake pipe inadequately clipped (3.6.B.1)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Trailer electrical socket insecure (1.9.3a)

front brake application uneven (3.7.B.2)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Vehicle structure has slight corrosion (6.1.A.1)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear coil spring corroded (2.4.C.1b)

Rear bumper insecure

Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)

front and rear brake hoses are rusty on ends.

lots of chassis etc is rusty.

nearside front brake disc is worn.

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear fog lamp not working (1.3.2b)

Offside Registration plate lamp not working (1.1.C.1d)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)

front and rear brake hoses are rusty on ends.

front brakes pull to nearside.

lots of chassis etc is rusty.

nearside front brake disc is worn.

rear footbrake efforts are low.

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

slight cracking in o/s rear tyre