MOT Status
ValidMileage
56,859 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Exhaust emits excessive dense blue smoke during acceleration (8.2.1.2 (g))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Shock absorbers has negligible damping effect (5.3.2 (d))
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Body mounting area corroded / holed (6.2.2 (d) (i))
Nearside Rear Shock absorbers has negligible damping effect (5.3.2 (d))
Offside Front Shock absorbers has negligible damping effect (5.3.2 (d))
Offside Rear Shock absorbers has negligible damping effect (5.3.2 (d))
Front Steering arm shock damper bush showing signs of wear
Front Steering component mounting prescribed area is corroded but not considered excessive Steering box mounting / chassis corroded (2.1.2 (e) (i))
Nearside Front Coil spring corroded Worn and corroded NEAR FAIL (5.3.1 (b) (i))
Nearside Fuel hose deteriorated Fuel pipes from fuel tank corroded (6.1.3 (c) (ii))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Linkage bushes perishing (5.3.4 (a) (i))
Nearside Rear Coil spring corroded Corroded / worn NEAR FAIL (5.3.1 (b) (i))
Offside Front Brake pipe corroded, covered in grease or other material Corroded (1.1.11 (c))
Offside Front Coil spring worn Worn and corroded NEAR FAIL (5.3.1 (b) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Linkage bushes perishing (5.3.4 (a) (i))
Offside Rear Coil spring worn Corroded / worn NEAR FAIL (5.3.1 (b) (i))
Rear Prop shaft flexible coupling slightly deteriorated Rear prop 2nd from rear U jay (6.1.7 (d) (i))
Front Coil spring corroded Both front coil springs corroded / worn (5.3.1 (b) (i))
Front Shock absorbers has a reduced damping effect Both front shocks NEAR FAIL (5.3.2 (d))
Front Steering component deformed but serviceable Steering shock absorber damper bush worn (2.1.3 (c) (i))
Rear Coil spring corroded Both rear coil springs corroded / worn (5.3.1 (b) (i))
Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
Rear Shock absorbers has a reduced damping effect Both rear shocks NEAR FAIL (5.3.2 (d))
Front Headlamp aim unable to be tested Headlight aim not tested BOTH (4.1.2 (b))
Front Windscreen wiper does not clear the windscreen effectively Both front wiper blades split (3.4 (b) (ii))
Main beam tell-tale not working Light on all the time / not working correctly (4.9.1 (a) (ii))
Nearside Front Headlamp not working on dipped beam Dipped beam not working (4.1.1 (a) (ii))
Nearside Front Headlamp not working on main beam Main beam not working (4.1.1 (a) (ii))
Offside Front Headlamp not working on dipped beam Dipped beam not working (4.1.1 (a) (ii))
Offside Front Headlamp not working on main beam Main beam not working (4.1.1 (a) (ii))
Front Coil spring corroded Both front coil springs corroded / worn (5.3.1 (b) (i))
Front Shock absorbers has a reduced damping effect Both front shocks NEAR FAIL (5.3.2 (d))
Front Steering component deformed but serviceable Steering shock absorber damper bush worn (2.1.3 (c) (i))
Rear Coil spring corroded Both rear coil springs corroded / worn (5.3.1 (b) (i))
Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
Rear Shock absorbers has a reduced damping effect Both rear shocks NEAR FAIL (5.3.2 (d))
Nearside Front Lower Advise spot/ fog light broken away
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Coil spring corroded Advise both rears (5.3.1 (b) (i))
Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Body mounting / chassis inner sill area corroded holed (6.2.2 (d) (i))
Offside Front Direction indicator not working Advise front indicator (4.4.1 (a) (ii))
Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired Body mounting / inner sill area seat belt mounting areas corroded / holed (6.2.2 (d) (ii)) DANGEROUS
Nearside Front Lower Advise spot/ fog light broken away
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Coil spring corroded Advise both rears (5.3.1 (b) (i))
Central Exhaust has a minor leak of exhaust gases Clamp joint to cat (6.1.2 (a))
Nearside Front Upper Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement Advise rear D bush (5.3.4 (a) (i))
Offside Front Upper Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Exhaust system not adequately supported (7.1.1)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Steering damper leaking oil (2.2.C.1f)
Vehicle structure has slight corrosion (6.1.B.2)
tyres cracking in tread
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside rear brake binding (3.7.B.1)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Power steering component(s) leaking (2.3.3b)
Steering damper leaking oil (2.2.C.1f)
rear brake application uneven (3.7.B.2)
tyres cracking in tread
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Emissions not tested (7.0)
Nearside rear brake grabbing slightly (3.7.A.5b)
Offside rear brake grabbing slightly (3.7.A.5b)
Offside rear brake recording little or no effort (3.7.B.5a)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Exhaust has a minor leak of exhaust gases (7.1.2)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
exhaust blowing at manifold
Front Exhaust has a minor leak of exhaust gases (7.1.2)
How Reliable is the Chrysler-jeep Wrangler?
Based on 22,884 MOT tests across 1,547 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R417 RLY is a 1997 Chrysler-jeep Wrangler in Red with a 2,464cc petrol engine. This vehicle has been through 32 MOT tests with a personal pass rate of 65.6%.
Across all 1997 Chrysler-jeep Wrangler models, the average MOT pass rate is 69.4% with a typical mileage of 80,233 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Chrysler-jeep Wrangler fails its MOT is brake pipe excessively corroded, accounting for 792 recorded failures. If you're considering buying R417 RLY, it's worth having these areas checked by a mechanic before committing.
The Chrysler-jeep Wrangler typically stays on UK roads for around 33 years. At 29 years old, this Chrysler-jeep Wrangler is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of R417 RLY?
You can check the full history of R417 RLY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R417 RLY registered?
R417 RLY is a 1997 Chrysler-jeep Wrangler, first registered on 29 August 1997.
Is R417 RLY safe to buy?
The MOT history for R417 RLY shows 32 tests with a 65.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R417 RLY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R417 RLY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.