1997 Mazda Bongo

Rear Exhaust has a minor leak of exhaust gases back box (6.1.2 (a))

Nearside Front coolant leek

Nearside Non obligatory mirror damaged ()

Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill central corroded / holed but not within a prescribed area (6.1.1 (c) (i))

Offside Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill central & front (5.3.6 (a) (i))

Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill front to rear (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger (5.3.6 (a) (i))

Nearside Front coolant leek

Nearside Non obligatory mirror damaged ()

Offside Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust has a major leak of exhaust gases flexi (6.1.2 (a))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge worn on outer edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge worn on outer edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust has a major leak of exhaust gases back box (6.1.2 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened inner face corroded (1.1.14 (a) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Nearside side repeater lens broken

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))

Rear Exhaust has a minor leak of exhaust gases tail box (6.1.2 (a))

Rear Oil leak, but not excessive engine (8.4.1 (a) (i))

Dipswitch does not operate immediately when selected on main beam main beam will not stay engaged (4.1.3 (b))

Nearside Side repeater incorrect colour (4.4.3 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened inner face corroded (1.1.14 (a) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Nearside side repeater lens broken

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))

Rear Exhaust has a minor leak of exhaust gases tail box (6.1.2 (a))

Rear Oil leak, but not excessive engine (8.4.1 (a) (i))

Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength front cross member (5.3.6 (a) (i))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Anti-roll bar linkage damaged and seriously weakened broken link (5.3.3 (b) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

front cross member corroded

Front Subframe mounting prescribed area is corroded but not considered excessive crossmember (2.4.A.3)

Nearside Front indicator repeater lens damaged

Nearside front brake fluctuating, but not excessively (3.7.B.3)

Offside front brake fluctuating, but not excessively (3.7.B.3)

Offside Front Wheel nut(s) missing (4.2.A.1e)

Front Subframe mounting prescribed area is corroded but not considered excessive crossmember (2.4.A.3)

Nearside Front indicator repeater lens damaged

Nearside front brake fluctuating, but not excessively (3.7.B.3)

Offside Front slight drag from brake

Offside front brake fluctuating, but not excessively (3.7.B.3)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Rear fog lamp not working (1.3.2b)

nsf tyre sidewall and outer shoulder worn

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

offside front tyre worn on inner edge

Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

offside front tyre worn on inner edge

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Anti-roll bar attachment bracket/mounting cracked (2.4.G.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)