1998 Ford Puma

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Nearside Rear Tyre has ply or cords exposed cut to cords (4.1.D.1b)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Registration plate lamp not working (1.1.C.1d)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Seat belt anchorage prescribed area is excessively corroded n/s rear floor (5.2.6)

Seat belt anchorage prescribed area is excessively corroded n/s/f floor (5.2.6)

Seat belt anchorage prescribed area is excessively corroded o/s and n/s outer sill (5.2.6)

Seat belt anchorage prescribed area is excessively corroded o/s front floor (5.2.6)

Suspension component mounting prescribed area is excessively corroded n/s rear inner wheel arch (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive o/s rear wheel arch (2.4.A.3)

hazard switch cover missing

n/s rear brake hose

o/s front center bearing driveshaft

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

both front brake discs rusty inside face

n/s outer sill corroded

o/s rear outer sill corroded

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

both front brake discs rusty inside face

n/s outer sill corroded

o/s rear outer sill corroded

Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front coil spring fractured (2.4.C.1a)

Offside Inner Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Braking system leaking (3.6.A.1) DANGEROUS

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

front flexable brake hoses+rear brake pipes corroded & cracked

Rear Exhaust has a minor leak of exhaust gases (7.1.2)