2007 Mazda Bongo

Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i))

Nearside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i))

Offside Rear Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength end of sill (5.3.6 (a) (i))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Outer Body component corroded and likely to cause injury wheel arch (6.2.1 (a) (i))

Offside Front Body component corroded and likely to cause injury wing (6.2.1 (a) (i))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Rear Outer Body component corroded and likely to cause injury wheel arch (6.2.1 (a) (i))

Central Upper Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Front Coil spring corroded both sides (5.3.1 (b) (i))

Nearside Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge edge wear (5.2.3 (e))

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive around strut top (5.3.6 (a) (i))

Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Rear Bumper mountings corroded but not likely to become detached both sides (6.1.4 (a) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Underside of vehicle and been heavily undersealed

Central Rear Upper Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Inner Integral body structure is corroded but structural rigidity is not significantly reduced sills both sides (6.1.1 (c) (i))

Nearside Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive around strut top (5.3.6 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Towbar component corroded, but not excessively (6.1.6 (a))

both rear wheel arches corroded \no sharp edges time of test

Nearside Rear Corrosion to wheel arch area

Offside Rear Corrosion to wheel arch area

Central Stop lamp(s) not working High level (4.3.1 (a) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Service brake lagging in operation (1.2.1 (d))

Rear Exhaust silencer likely to become detached Silencer missing (8.1.1 (b) (ii)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread Cracked (0.1 (b))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced Outer sill area (6.1.1 (c) (i))

Nearside Rear Corrosion to wheel arch area

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Undersill area (6.1.1 (c) (i))

Offside Front Wheel bearing will require check on retest

Offside Rear Corrosion to wheel arch area

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Undersill area (6.1.1 (c) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Nail in tyre ()

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Nail in tyre ()

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Coil spring corroded both rear (5.3.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension arm corroded but not seriously weakened x2 (5.3.3 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened x2 (5.3.3 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both front inner sills holed, just outside of prescribed areas (5.3.6 (a) (i))

Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

both front hub assemblies corroded

both rear wheel arches corroded

n/s outer sill holed, outside of prescribed area

n/s/r lamp damaged

rear axle corroded

tow bar corroded

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Coil spring corroded both rear (5.3.1 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension arm corroded but not seriously weakened x2 (5.3.3 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened x2 (5.3.3 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both front inner sills holed, just outside of prescribed areas (5.3.6 (a) (i))

Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

both front hub assemblies corroded

both rear wheel arches corroded

n/s outer sill holed, outside of prescribed area

n/s/r lamp damaged

rear axle corroded

tow bar corroded

fuel injection pump damp

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

fuel injection pump damp

N/s/r lamp damaged

N/s/r wheel arch corroded

O/s/f brake dragging on

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Spare tyre defective deflated ()

Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))

Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill and sill end panel (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and sill end panel (5.3.6 (a) (i))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt cracking (2.1.3 (g) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt cracking (2.1.3 (g) (i))

Spare tyre defective deflated ()

Lower radiator support heavily corroded

Nearside rear light lens damaged

Offside front wheel slight brake bind

Fuel system component leaking (7.2.3)

Lower radiator support heavily corroded

Nearside rear light lens damaged

Offside front wheel slight brake bind

Both rear outer sills corroded

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Oil leak

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front Seat belt locking mechanism does not secure or release (5.2.5a)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Parking brake lever has no reserve travel (3.1.6b)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Rear Brake pad(s) wearing thin (3.5.1g)

Brakes imbalanced across an axle (3.7.B.5b)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Headlamp not in a clean condition affecting beam image (1.2.4a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Tyre worn close to the legal limit (4.1.E.1)