1998 Mazda Bongo

Nearside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill/suspension mounting/seat belt anchorage (6.1.1 (c) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill/suspension mounting/seat belt anchorage (6.1.1 (c) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

surface corrosion throughout under side

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill/suspension mounting/seat belt anchorage (6.1.1 (c) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill/suspension mounting/seat belt anchorage (6.1.1 (c) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

surface corrosion throughout under side

Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill/seat belt anchorage/suspension mlounting (6.1.1 (c) (i))

Nearside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill/seat belt anchorage/suspension mlounting (6.1.1 (c) (i))

Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill/seat belt anchorage/suspension mlounting (6.1.1 (c) (i))

Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill/seat belt anchorage/suspension mlounting (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

surface corrosion throughout under side

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

offside outer sill corroded but not seriously weakened

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

offside outer sill corroded but not seriously weakened

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Front Exhaust has a major leak of exhaust gases silencer (6.1.2 (a))

Nearside Headlamp aim not tested (4.1.2 (b))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

offside front brake is binding slightly

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

offside front brake is binding slightly

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill/out rigger (6.1.1 (c) (i))

Offside Rear Lower Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/outrigger (6.1.1 (c) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill/out rigger (6.1.1 (c) (i))

Offside Rear Lower Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Rear Exhaust has a minor leak of exhaust gases silencer (7.1.2)

Nearside rear brake binding (3.7.B.1)

Offside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside rear brake binding (3.7.B.1)

Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Rear Exhaust has a minor leak of exhaust gases silencer (7.1.2)

Items removed from driver's view prior to test ()

both rear arb links slight play

rear arb bushes slight play

Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Items removed from driver's view prior to test ()

both rear arb links slight play

rear arb bushes slight play

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc slightly pitted (3.5.1h)

o/s/rear tyre wall perished

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

rear brake application uneven (3.7.B.2)

Front brake disc slightly pitted (3.5.1h)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

o/s/rear tyre wall perished

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)