MOT Status
ExpiredMileage
158,778 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
o/s/f bumper insecure
rear chassis heavily corroded
water ingress in n/s headlight
wear in steering rack ends
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
o/s/f bumper insecure
rear chassis heavily corroded
water ingress in n/s headlight
wear in steering rack ends
Under-trays fitted obscuring some underside components
brake pipe corroded on baulkhead
rear brake discs corroded
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Headlamp not working on main beam (1.7.5a)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Service brake: efficiency below requirements (3.7.B.7)
Under-trays fitted obscuring some underside components
brake pipe corroded on baulkhead
rear brake discs corroded
Front Brake hose slightly deteriorated (3.6.B.4d)
Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Steering rack gaiter deteriorated (2.2.D.2d)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)
general corrosion of vehicle chassis
slight deterioration of headlamp paterns
Nearside Front Lower Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Upper Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Headlamp not working on main beam (1.7.5a)
Front Brake hose slightly deteriorated (3.6.B.4d)
Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Steering rack gaiter deteriorated (2.2.D.2d)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)
general corrosion of vehicle chassis
slight deterioration of headlamp paterns
Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)
general corrosion of rear chassis
o/s/r brake disc has slight run out
slight deterioration of headlamp paterns
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Track rod end ball joint has excessive play (2.2.B.1f)
Offside Body has a sharp edge caused by corrosion (6.1.C.1)
Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
headlamp paterns slightly poor
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
corrosion of underbody
door bottoms andfront wing edges corroded
headlamp paterns slightly poor
o/s wiper blade slightly poor
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
corrosion of underbody
door bottoms andfront wing edges corroded
headlamp paterns slightly poor
o/s wiper blade slightly poor
Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Nearside Headlamp damaged but light output not reduced (1.7.5a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Headlamp damaged but light output not reduced (1.7.5a)
Rear brake disc slightly pitted (3.5.1h)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Nearside Headlamp damaged but light output not reduced (1.7.5a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Headlamp damaged but light output not reduced (1.7.5a)
Rear brake disc slightly pitted (3.5.1h)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Front constant velocity joint gaiter split (2.5.C.1a)
Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Headlamp not in good working order but not adversely affecting beam image (1.2.4a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Headlamp not in good working order but not adversely affecting beam image (1.2.4a)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Headlamp not in good working order but not adversely affecting beam image (1.2.4a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Headlamp not in good working order but not adversely affecting beam image (1.2.4a)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)
Offside Lower Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R458 JAF is a 1998 Mercedes-benz Vito in White with a 1,998cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 47.6%.
Across all 1998 Mercedes-benz Vito models, the average MOT pass rate is 61.4% with a typical mileage of 123,856 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying R458 JAF, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 28 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of R458 JAF?
You can check the full history of R458 JAF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R458 JAF registered?
R458 JAF is a 1998 Mercedes-benz Vito, first registered on 27 May 1998.
Is R458 JAF safe to buy?
The MOT history for R458 JAF shows 21 tests with a 47.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R458 JAF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R458 JAF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.