MOT Status
ExpiredMileage
96,666 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Brake hose slightly deteriorated (3.6.B.4d)
screen is damaged (outside and in zone "B") but not not larger than 40mm in zone "B"
Brake hose excessively deteriorated (3.6.B.4d)
Brake pipe excessively corroded (3.6.B.2c)
Brakes imbalanced across an axle (3.7.B.5b)
Front registration plate deteriorated (6.3.1d)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Inner Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)
Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear wheel bearing rough when rotated (2.6.1)
Offside front brake binding (3.7.B.1)
Parking brake: efficiency below requirements (3.7.B.7)
Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Brake hose slightly deteriorated (3.6.B.4d)
screen is damaged (outside and in zone "B") but not not larger than 40mm in zone "B"
Brakes imbalanced across an axle (3.7.B.5b)
Emissions not tested (7.0)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
both front brake flexi hoses cracking but not exposing cords
centre exhaust section in poor condition
slight cracking on inner side tyre wall o/s/r' damp patch on o/s corner of windscreen
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Steering component mounting prescribed area is excessively corroded (2.2.C.1h)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded (3.1.9)
Offside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded (3.1.9)
Offside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear wheel bearing rough when rotated (2.6.1)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded (3.1.9)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear wheel bearing rough when rotated (2.6.1)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Headlamp aim too high (1.8)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Registration plate lamp not working (1.1.5c)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
offside bottom corner of windsreen discoloured
offside rear tyre has bleb in sidewall
offside rear wheel bearing noisy
offside windscreen piller corroded
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Rear wheel bearing rough when rotated (2.6.1)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front front brake binding (3.7.B.1)
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear rear brake grabbing slightly (3.7.A.5b)
advise vehicle getty rusty in places /advise front number plate discoulouring in places/
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R464 EBE is a 1998 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 13 MOT tests with a personal pass rate of 46.2%.
Across all 1998 Ford Ka models, the average MOT pass rate is 62.2% with a typical mileage of 62,348 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying R464 EBE, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 28 years old, this Ford Ka is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of R464 EBE?
You can check the full history of R464 EBE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R464 EBE registered?
R464 EBE is a 1998 Ford Ka, first registered on 24 January 1998.
Is R464 EBE safe to buy?
The MOT history for R464 EBE shows 13 tests with a 46.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R464 EBE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R464 EBE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.