1997 Subaru Impreza

Nearside Front Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

partial surface corrosion under-neath vehicle

underneath partially under-sealed

Rear Shock absorber has a light misting of oil both (2.7.3)

Body insecure and dangerous to other road users bonnet (6.1.B.1b)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Fuel pipe leaking tank breather pipe (7.2.3)

Fuel pipe leaking tank filler pipe where breather attaches (7.2.3)

Headlamp aim too high both (1.8)

Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded inner & outer sills (5.2.6)

Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Body has a sharp edge caused by corrosion wing (6.1.C.1)

Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded inner & outer sills (5.2.6)

Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Registration plate lamp not working (1.1.C.1d)

Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Windscreen washer provides insufficient washer liquid (8.2.3)

Rear Shock absorber has a light misting of oil both (2.7.3)

rear bumper insecure

Bonnet cannot be secured in the closed position (8.4.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Subframe mounting prescribed area is excessively corroded rear outer sill (2.4.A.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Subframe mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Stop lamp not working (1.2.1b)

Registration plate lamp not working (1.1.C.1d)

Offside Front wheel bearing has slight play (2.5.A.3c)

Nearside Front Lower Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

both front shockers slightly damp

Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

adv front disc worn

adv front disc worn

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)