1998 Ford Puma

Nearside Front seat belt slow to return

Offside Front seat belt slow to return

Oil leak, but not excessive engine (8.4.1 (a) (i))

Hazard warning lamps inoperative (4.4.1 (e))

Horn not working (7.7 (a))

Nearside Front Macpherson strut top bush or bearing has excessive wear or free play (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Brake pipe inadequately clipped or supported front to rear (1.1.11 (d) (i))

Nearside Front seat belt slow to return

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front seat belt slow to return

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Exhaust has a major leak of exhaust gases rear silencer. (6.1.2 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front outer sill corroded.

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

parking brake effort only just met requirements.

parking brake effort significantly lower at nearside rear.

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

under seal on under body

Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

under body covered in under seal

Front Obligatory mirror missing (3.3 (a))

Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))

Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Front Brake hose slightly deteriorated both (1.1.12 (b) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Front Brake hose slightly deteriorated both (1.1.12 (b) (ii))

Nearside Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))

Nearside floor coroded

Offside floor

Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) wearing thin 70% worn (3.5.1g)

Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)

Front Brake pad(s) wearing thin 70% worn (3.5.1g)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Brake performance not tested (3.7.A.1)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Offside Rear Brake pipe leaking (3.6.A.1) DANGEROUS

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust noisy (7.1.4)

Nearside Front Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Front Shock absorber has a serious fluid leak (2.7.3)