2007 Mazda Bongo

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill x2 (7.1.1 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill x2 (7.1.1 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Nail in tyre ()

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Surface corrosion to all suspension areas

Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced rear panel/x-member (6.1.1 (c) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/jacking point/door step (6.1.1 (c) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced end of chassis rail/rear panel (6.1.1 (c) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch/end of sill (6.1.1 (c) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch x2 places (6.1.1 (c) (i))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/jacking point/door step x2 places (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

some suspension and brake components - corroded

some underside body and chassis corrosion

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

surface corrosion to the underside of the vehicle

Coil spring corroded both rear (5.3.1 (b) (i))

various areas of surface corrosion to underside of the vehicle

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Coil spring corroded both rear (5.3.1 (b) (i))

various areas of surface corrosion to underside of the vehicle

Coil spring corroded both rear (5.3.1 (b) (i))

advise various areas of surface corrosion to underside of vehicle and outer sills (not within a prescribed area)

Exhaust has a major leak of exhaust gases centre flexi section (6.1.2 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (5.3.6 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Coil spring corroded both rear (5.3.1 (b) (i))

advise various areas of surface corrosion to underside of vehicle and outer sills (not within a prescribed area)

coil spring corroded both rear (2.4.C.1b)

exhaust system slightly deteriorated

various areas of surface corrosion to underside including both outer sill areas

advise rear brake pads wearing low

coil spring corroded both rear (2.4.C.1b)

Emissions not tested due to exhaust condition (7.4.B.1)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Anti-roll bar linkage fractured (2.4.G.1)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Stop lamp not working both (1.2.1b) DANGEROUS

advise unable to clearly see rear brake pads thickness

coil spring corroded both rear (2.4.C.1b)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Tyre worn close to the legal limit both front (4.1.E.1)

coil spring corroded both rear (2.4.C.1b)

slight play in offside front inner steering rack joint

various areas surface corrosion to uderside of vehicle

Nearside Front Subframe mounting prescribed area is excessively corroded chassis outrigger area (2.4.A.3)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Subframe mounting prescribed area is excessively corroded chassis outrigger area (2.4.A.3)

Offside Front front brake binding (3.7.B.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner and outer sill areas (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch area (2.4.A.3)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Tyre worn close to the legal limit both front (4.1.E.1)

advise play in offside front inner steering rack joint

coil spring corroded both rear (2.4.C.1b)

unable to clearly see condition of front and rear brake pad thickness

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Oil leak

various areas of surface corrosion to inner and outer sill/ inner wheel arch areas

Oil leak

Nail in nearside rear tyre

front discs corroded but ok at time of test