1997 Land Rover Discovery

Nearside & offside inner sills and chassis sections have been filled and undersealed. Appears to be metal plates underneath but unable to check weld quality

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive Seat belt mounting attachment to cross member (7.1.1 (a) (i))

Brake pedal anti-slip provision missing (1.1.2 (c))

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Inner Seat belt anchorage prescribed area is inadequately repaired Sill has been filled (7.1.1 (a) (i))

Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Inner Seat belt anchorage prescribed area is inadequately repaired sill has been filled (7.1.1 (a) (i))

Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Seat belt mounting on cross member (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wing/floor area (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake lever ratchet not holding correctly (1.1.6 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive Seat belt mounting attachment to cross member (7.1.1 (a) (i))

Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))

Nearside Front Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Brake prescribed area is corroded but not considered excessive (1.1.21 (e) (i))

Nearside Seat belt anchorage prescribed area is repaired but cant see because under sealer covering it

Oil leak, but not excessive (8.4.1 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))

Nearside Front Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Prop shaft bearing excessively worn (6.1.7 (b) (i))

Prop shaft securing bolt loose (6.1.7 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Rear Brake pad(s) incorrectly mounted (1.1.13 (c)) DANGEROUS

Brake prescribed area is corroded but not considered excessive (1.1.21 (e) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Oil leaking excessively from engine (8.4.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Prop shaft bearing excessively worn (6.1.7 (b) (i))

Prop shaft securing bolt loose (6.1.7 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Road wheel fixing missing (5.2.1 (a) (i))

Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Subframe mounting prescribed area excessively corroded significantly reducing structural strength both (5.3.6 (a) (i))

Rear Brake pad(s) incorrectly mounted (1.1.13 (c)) DANGEROUS

Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Ball joint has slight play (2.2.B.1f)

Nearside Front Seat belt stitching slightly frayed (5.2.2b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Ball joint has slight play (2.2.B.1f)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pipe slightly corroded (3.6.B.2c)

extensive welding carried out

under side heavily undersealed

Nearside Front Brake pad(s) wearing thin inner pad (3.5.1g)

Nearside Front Seat belt stitching slightly frayed (5.2.2b)

Offside Front Brake pad(s) wearing thin inner pad (3.5.1g)

Offside Rear Vehicle structure has slight corrosion above bump stop (6.1.B.2)

Nearside Rear Lower Shock absorber has an excessively worn bush (2.7.4)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis (6.1.B.2)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill/body mount (6.1.B.2)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch near seat belt mount (6.1.B.2)

Nearside Front Brake pad(s) wearing thin inner pad (3.5.1g)

Nearside Front Seat belt stitching slightly frayed (5.2.2b)

Offside Front Brake pad(s) wearing thin inner pad (3.5.1g)

Offside Rear Vehicle structure has slight corrosion above bump stop (6.1.B.2)

Nearside Rear Shock absorber has a slightly worn bush (2.7.4)

Offside Rear Inner Body has slight corrosion sill at body mount (6.1.B.2)

Rear Vehicle structure has slight corrosion (6.1.B.2)

Nearside Rear Shock absorber has a slightly worn bush (2.7.4)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Rear Inner Body has slight corrosion sill at body mount (6.1.B.2)

Rear Vehicle structure has slight corrosion (6.1.B.2)

tow bar and ball fitted ok

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pad(s) wearing thin (3.5.1g)

tow bar and ball fitted ok

Inner Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Vehicle structure has slight corrosion (6.1.B.2)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

advise att to n/s/r indicator timing speed

o/s/r lower tail light inop

Inner Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Headlamp aim too high (1.8)

Nearside Front Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Headlamp aim too high (1.8)

Offside Front Vehicle structure has slight corrosion (6.1.B.2)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

advise att to n/s/r indicator timing speed

o/s/r lower tail light inop

Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Outer Rear Lower Rear position lamp(s) not working (1.1.A.3b)

Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Front Ball joint has slight play (2.2.B.1f)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Shock absorber has a slightly reduced damping effect (2.7.5)

Vehicle structure has slight corrosion (6.1.A.1)

corrosion in near side front inner wing

Nearside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Upper Shock absorber has an excessively worn bush (2.7.4)

Offside Rear Upper Shock absorber has an excessively worn bush (2.7.4)

Offside Front Ball joint has slight play (2.2.B.1f)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Shock absorber has a slightly reduced damping effect (2.7.5)

Vehicle structure has slight corrosion (6.1.A.1)

corrosion in near side front inner wing

Nearside Rear Body has slight corrosion (6.1.B.2)

Nearside Rear Upper Shock absorber has a slightly worn bush (2.7.4)

Offside Rear Body has slight corrosion (6.1.B.2)

excess corrosion at n/f/inner wing

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Direction indicator not working (1.4.A.2c)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Upper Shock absorber has a slightly worn bush (2.7.4)

Offside Rear Upper Shock absorber has a slightly worn bush (2.7.4)

excessve corrosion at n/s/front inner wing

Child seat fitted not allowing full inspection of adult belt

Front Upper Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)

Steering system has slight free play detected at steering wheel (2.2.A.1a)

Emissions not tested (7.0)

Rear Exhaust has part of the system excessively deteriorated (7.1.1a)

Child seat fitted not allowing full inspection of adult belt

Front Upper Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)

Steering system has slight free play detected at steering wheel (2.2.A.1a)

Nearside Rear Upper Shock absorber has a slightly worn bush (2.7.4)

Offside Rear Upper Shock absorber has a slightly worn bush (2.7.4)

Nearside Rear Upper Shock absorber has a slightly worn bush (2.7.4)

Offside Lower Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Rear Upper Shock absorber has a slightly worn bush (2.7.4)

Nearside Headlamp aim too high (1.8)

Nearside Rear Upper Shock absorber has a slightly worn bush (2.7.4)

Nearside Windscreen wiper blade deteriorated (8.2.2)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Windscreen wiper blade deteriorated (8.2.2)

Registration plate lamp not working (1.1.5c)

Nearside Rear Upper Shock absorber has a slightly worn bush (2.7.4)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)