1998 Rover 420

Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Registration plate lamp not working (1.1.5c)

Rear rear brake recording little or no effort (3.7.B.5a)

Service brake: efficiency below requirements (3.7.B.7)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Battery insecure

Exhaust system in poor condition

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front and Rear brake discs in poor condition

Nearside Rear Lower Trailing arm has slight play in a pin/bush (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Rear Lower Trailing arm has slight play in a pin/bush (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Rear Seat belt damaged but not affecting the operation of the belt (5.2.2a)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

both headlight beam patterns only just visible

underbody corrosion

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Headlamp aim too low (1.8)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside rear brake application uneven (3.7.B.2)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Direction indicator incorrect colour (1.4.A.2f)

Child seat fitted not allowing full inspection of adult belt

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Headlamp aim too low (1.8)

Offside Rear Front position lamp(s) not working (1.1.A.3b)

Offside Rear fog lamp not working (1.3.2b)

Offside rear brake juddering severely (3.7.A.5b)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear fog lamp tell tale not working (1.3.1b)

Registration plate lamp not working (1.1.5c)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)