2008 Mazda Bongo

Front Headlamp has a product on the lens but not seriously reducing light output head light lenses faded (4.1.4 (b))

Lower Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Lower the whole of the underneath has had full wax oil front to back

Nearside Front Child Seat fitted not allowing full inspection of adult belt ()

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Headlamp has a product on the lens but not seriously reducing light output head light lenses faded (4.1.4 (b))

Lower Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Lower the whole of the underneath has had full wax oil front to back

Nearside Front Child Seat fitted not allowing full inspection of adult belt ()

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake pad(s) wearing thin on limit (3.5.1g)

Offside Rear Brake pad(s) wearing thin on limit (3.5.1g)

Parking brake lever has little reserve travel (3.1.6b)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

o/s front link arm slight play

Front Headlamp aim beam image obviously incorrect both (1.8.A.1b)

Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sills both (6.1.B.2)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Registration plate lamp not working (1.1.C.1d)

Nearside Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Inner Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Battery insecure n/s front (1.9.1)

Parking brake: efficiency below requirements (3.7.B.7)

Registration plate lamp not working o/s rear (1.1.C.1d)

Service brake: efficiency below requirements (3.7.B.7)

Suspension component mounting prescribed area is excessively corroded n/s outer sill (2.4.A.3)

Suspension component mounting prescribed area is excessively corroded n/s under sill (2.4.A.3)

Tyre tread depth below requirements of 1.6mm o/s front (4.1.E.1)

Tyre worn close to the legal limit n/s rear (4.1.E.1)

coil spring corroded o/s front (2.4.C.1b)

oil leak

Nearside Front Front wheel bearing rough when rotated (2.5.A.2)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Mechanical brake component has restricted free movement (3.5.1k)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear fog lamp not working (1.3.2b)

Rear registration plate obscured (6.3.1d)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Battery insecure (1.9.1)

Offside Front An item not tested (Manual)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Rear fog lamp not working (1.3.2b)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear fog lamp missing (1.3.2a)

Offside Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Rear fog lamp not working (1.3.2b)

Registration plate lamp not working (1.1.5c)

Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Rear Rear fog lamp missing (1.3.2a)