1998 Honda Shuttle

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Lower Suspension arm locating pin retaining device missing (2.4.G.3b)

Nearside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Lower Suspension arm locating pin retaining device missing (2.4.G.3b)

Offside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Rear Body has excessive displacement which may lead to loss of vehicle control (6.1.B.1a)

Registration plate lamp not working (1.1.C.1d)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Exhaust emits dense blue smoke at idle (7.3.A.2b)

Exhaust emits excessive dense blue smoke during acceleration (7.3.A.2c)

Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Front Electrical wiring deteriorated and bare wires exposed (1.9.2c)

Nearside Front Windscreen wiper blade insecure (8.2.2)

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Front suspension retaining device missing (2.5.A.4)

Nearside Rear Body has excessive displacement which may lead to loss of vehicle control (6.1.B.1a)

Nearside Rear Radius arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Upper Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Front Windscreen wiper blade insecure (8.2.2)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front suspension retaining device missing (2.5.A.4)

Offside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Radius arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Upper Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front Body has slight corrosion (6.1.B.2)

Offside Rear Body has slight displacement of the body relative to the chassis (6.1.B.1a)

Offside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)

Offside Rear coil spring corroded (2.4.C.1b)

Oil leak

air filter box insecure

exhaust corroded to excess

nail in the edge of nearside rear tyre

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Stop lamp not working (1.2.1b)

Offside Rear Body insecure and dangerous to other road users (6.1.B.1b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Stop lamp not working (1.2.1b)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Radius arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Windscreen wiper not operating over a large enough area to give an adequate view (8.2.1c)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Offside Rear Radius arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Windscreen wiper not operating over a large enough area to give an adequate view (8.2.1c)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Front Headlamp not in good working order but not adversely affecting beam image (1.2.4a)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear coil spring corroded (2.4.C.1b)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Vehicle structure has slight damage (6.1.A.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.5c)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)