1998 Honda CB600

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Front Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Front suspension assembly component loose spindle pinch bolts (2.3.1)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Offside Footrest insecure (6.2.1a)

Rear Drive chain slightly loose (6.2.1d)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Drive chain worn but not considered excessive (6.2.1e)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Tyre valve stem slightly damaged (4.1.2c)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Drive chain worn but not considered excessive (6.2.1e)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Indicator switch insecure (1.5.4)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Front Brake disc(s) cracked (3.2.A1g)

Offside Front Brake pad(s) contaminated by oil or grease (3.2.A1k)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear wheel bearings have excessive free play (2.4.A.2c)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

chain and sprockets worn.

noise coming from rear wheel, possible bearings. advise attention.

rear hugger loose.

Nearside Front Brake disc(s) cracked (3.2.A1g)

Offside Front Brake disc(s) cracked (3.2.A1g)

Offside Front Brake pad(s) contaminated by oil or grease (3.2.A1k)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear wheel bearings have excessive free play (2.4.A.2c)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain slightly loose (6.2.1d)

Nail in rear tyre

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Wheel alignment slightly misaligned. (2.5.1)

rear tyre cracking

Front wheel bearings are slightly rough (2.3.5b)

Drive chain excessively tight (6.2.1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front wheel bearings have slight free play (2.3.5b)

Wheel alignment slightly misaligned. (2.5.1)