MOT Status
ExpiredMileage
72,298 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Lower Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brakes imbalanced across an axle (3.7.B.5b)
Horn not working (1.6.2a)
Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Lower Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Centre Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Centre Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Parking brake: efficiency below requirements (3.7.B.7)
Driver's door cannot be opened from outside the vehicle (6.2.B.1b)
Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.3.D.1)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Front passenger door cannot be opened from outside the vehicle (6.2.B.1b)
Nearside Front Lower Suspension arm corroded and seriously weakened (2.4.G.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Sub-frame has excessive play in a pin/bush (2.4.G.2)
Steering rack deformed and unserviceable (2.2.C.1d)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Headlamp aim too low (1.8)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Obligatory mirror missing (8.1.1)
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Front Vehicle structure has slight corrosion (6.1.B.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front brake disc slightly scored (3.5.1h)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front brake disc slightly scored (3.5.1h)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Offside Front Lower Suspension arm corroded and seriously weakened (2.4.G.1) DANGEROUS
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R616 MRN is a 1998 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 14 MOT tests with a personal pass rate of 42.9%.
Across all 1998 Ford Ka models, the average MOT pass rate is 62.2% with a typical mileage of 62,348 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying R616 MRN, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 28 years old, this Ford Ka is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of R616 MRN?
You can check the full history of R616 MRN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R616 MRN registered?
R616 MRN is a 1998 Ford Ka, first registered on 23 January 1998.
Is R616 MRN safe to buy?
The MOT history for R616 MRN shows 14 tests with a 42.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R616 MRN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R616 MRN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.