MOT Status
ExpiredMileage
65,395 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Subframe mounting prescribed area is inadequately repaired (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)
Offside Front Lower Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Subframe mounting prescribed area is inadequately repaired (2.4.A.3)
Offside Rear Brake cable insecure (3.5.1d)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)
Offside rear brake recording little or no effort (3.7.B.5a)
Rear Brakes imbalanced across an axle (3.7.B.5b)
rear parking (secondary) brakes imbalanced (3.7.B.6b)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
all weiding must be weilded alround rapiar to bs 4872 standrads
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front wheel bearing rough when rotated (2.5.A.2)
Rear rear brake application uneven (3.7.B.2)
Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b) DANGEROUS
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Nearside Rear Braking system leaking (3.6.A.1) DANGEROUS
Nearside rear brake recording little or no effort (3.7.B.5a) DANGEROUS
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6) DANGEROUS
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
coil spring corroded (2.4.C.1b)
front chassis legs slightly corroded
rear axel bushes deteriorated
rear chassis legs slightly corroded
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Seat belt damaged sufficient to significantly weakened the webbing (5.2.2a)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Front brake discs heavily scored / pitted on inner face
Nail in offside rear tyre
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
showing signs of corrosion throughout the vehicle structure
Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Front wheel bearing rough when rotated (2.5.A.2)
Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
showing signs of corrosion throughout the vehicle structure
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Rear Brake hose excessively deteriorated (3.6.B.4d)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
SHOWING SIGNS OF CORROSION N/S O/S OUTER SILLS
Front Exhaust has part of the system excessively deteriorated (7.1.1a)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
NEARSIDE AND OFFSIDE SILLS SHOWING SIGNS OF CORROSION AND SECTIONS OF THE FLOOR PAN ALSO SHOWING SIGNS OF CORROSION
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Upper Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)
NEARSIDE AND OFFSIDE SILLS SHOWING SIGNS OF CORROSION AND SECTIONS OF THE FLOOR PAN ALSO SHOWING SIGNS OF CORROSION
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Upper Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R619 HHB is a 1998 Ford Ka in Silver with a 1,299cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 47.1%.
Across all 1998 Ford Ka models, the average MOT pass rate is 62.2% with a typical mileage of 62,348 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying R619 HHB, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 28 years old, this Ford Ka is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of R619 HHB?
You can check the full history of R619 HHB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R619 HHB registered?
R619 HHB is a 1998 Ford Ka, first registered on 31 March 1998.
Is R619 HHB safe to buy?
The MOT history for R619 HHB shows 17 tests with a 47.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R619 HHB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R619 HHB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.