MOT Status
ExpiredMileage
174,972 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Windscreen washer not working (3.5 (a))
Nearside Front Headlamp aim too low (4.1.2 (a))
Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill below step (7.1.1 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced rear cross member and body 2 places (7.1.1 (a) (i))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Battery insecure and likely to cause a short circuit (4.13 (a) (ii))
Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill below step (7.1.1 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body / inner step area (5.3.6 (a) (i))
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced center inner sill (7.1.1 (a) (i))
Offside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced cross member and body 2 places (7.1.1 (a) (i))
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill and wheel arch (7.1.1 (a) (i))
Central Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Central Rear Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive spring mounting (5.3.6 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Hub seal slight weep of oil
Offside Rear Stop lamp(s) lens defective which has no effect on emitted light (4.3.1 (b) (i))
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive spring mounting (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear both suspension bump stops missing
Brake efficiency close to limits may need repair or adjustment.
Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened Corroded (1.1.14 (a) (ii))
Front Suspension component mounting prescribed area is corroded but not considered excessive Nearside and offside (5.3.6 (a) (i))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Rear Tyre obviously under inflated (5.2.3 (l))
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Rear Tyre obviously under inflated (5.2.3 (l))
Rear Brake disc worn, pitted or scored, but not seriously weakened Corroded (1.1.14 (a) (ii))
Rear Suspension arm corroded but not seriously weakened All (5.3.3 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive Nearside and offside (5.3.6 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front light broken
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength innersill (5.3.6 (a) (i))
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front crossmember (5.3.6 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front light broken
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Central Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Rear Brake pad(s) wearing thin (3.5.1g)
exhaust system corroded
rear brake application uneven (3.7.B.2)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Headlamp aim too low (1.8)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside front brake binding (3.7.B.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
exhaust system corroded
Central Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)
Corrosion underside
Nearside Rear Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement suspension arm (2.4.G.2)
Offside Rear tyre has damage to sidewall not deep enough to reach ply or cords
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Stop lamp not working (1.2.1b)
Offside Front Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is fractured sill (2.4.A.3)
Central Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)
Corrosion underside
Nearside Rear Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement suspension arm (2.4.G.2)
Offside Rear Stop lamp slightly discoloured (1.2.1e)
Offside Rear tyre has damage to sidewall not deep enough to reach ply or cords
Coolant leak ()
Offside Rear tyre has damage
corrosion on underside
Anti-roll bar has excessive play in a pin/bush both rear d bushes (2.4.G.2)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Body has a sharp edge caused by damage light (6.1.C.1)
Offside Rear Panhard rod has excessive play in a pin/bush (2.4.G.2)
Offside Rear Rear position lamp(s) incorrect colour (1.1.A.3e)
Offside Rear Stop lamp not working (1.2.1b)
Offside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded x member (2.4.A.3)
Coolant leak rad ()
tyre wall damaged off side rear
corrosion on inner near side and front rad x member corroding
Exhaust has a major leak of exhaust gases (7.1.2)
Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Stop lamp emits other than a steady red light (1.2.1e)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Rear position lamp(s) incorrect colour (1.1.A.3e)
Rear Body has a sharp edge caused by damage (6.1.C.1)
Rear rear brake application uneven (3.7.B.2)
corrosion on inner near side and front rad x member corroding
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear fog lamp insecure (1.3.2a)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Body has slight corrosion (6.1.B.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Headlamp not in good working order but not adversely affecting beam image (1.2.4a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
n/s rear tyre starting to perish
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R61 LAF is a 2008 Mazda Bongo in Silver with a 2,490cc diesel engine. This vehicle has been through 22 MOT tests with a personal pass rate of 59.1%.
Across all 2008 Mazda Bongo models, the average MOT pass rate is 66.5% with a typical mileage of 139,328 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying R61 LAF, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 18 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of R61 LAF?
You can check the full history of R61 LAF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R61 LAF registered?
R61 LAF is a 2008 Mazda Bongo, first registered on 13 May 2008.
Is R61 LAF safe to buy?
The MOT history for R61 LAF shows 22 tests with a 59.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R61 LAF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R61 LAF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.