1998 Honda CBR600

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Both mirrors not fitted at time of test

Exhaust noisy (8.1.1 (a))

Both mirrors not fitted at time of test

Exhaust noisy (8.1.1 (a))

Registration plate does not conform to the specified requirements (0.1 (d))

Exhaust noisy (8.1.1 (a))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Crude exhaust baffle fitted at time of test

Drive chain slightly loose (6.2.1d)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Rear Brake disc(s) slightly worn (3.2.A1l)

Steering movement slightly 'notchy' (2.2.1b)

reg plate small

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Steering movement slightly 'notchy' (2.2.1b)

reg plate small

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Small number plate fitted.

Wheel alignment slightly misaligned. (2.5.1)

Wheel alignment slightly misaligned. (2.5.1)

slight oil leak from filter

Exhaust is leaking but is not excessively noisey (7.1.1b)

Headlamp aim too high (1.6)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Wheel alignment slightly misaligned. (2.5.1)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Wheel alignment slightly misaligned. (2.5.1)

Exhaust markings indicating not for road use or similar wording (7.1.4)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))