1998 Rover 416

Front registration plate deteriorated (6.3.1d)

Nearside Front Inner Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Outer Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear Trailing arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Inner Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Rear Inner Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Body has a sharp edge caused by damage (6.1.C.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Stop lamp not working (1.2.1b)

Emissions not tested (7.0)

Exhaust has a major leak of exhaust gases (7.1.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

front brake application uneven (3.7.B.2)

Offside Trailing arm has slight play in a pin/bush (2.4.G.2)

n/s rear tyre wearing on edge

slight corrossion to rear inner sills

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Inner Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Corrosion to both inner sills

Plastic outer sill covers fitted

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Cuts to sidewall of N/S/F tyre

N/S/F tyre wearing on inner edge

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Plastic outer sill covers fitted

Sidewall damage to all tyres