MOT Status
ExpiredMileage
92,973 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake hose slightly damaged (3.6.B.4d)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
o/s outer sill panal rusting and has been "patch" repaired extensivly
o/s/rear fog light lens cracked
Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1) DANGEROUS
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake hose slightly damaged (3.6.B.4d)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
o/s outer sill panal rusting and has been "patch" repaired extensivly
o/s/rear fog light lens cracked
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Offside Headlamp aim too high and too far to the left. (1.8)
Offside Headlamp aim too low (1.8)
Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Stop lamp not working (1.2.1b)
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
Nearside Rear Upper Shock absorber has a slightly worn bush (2.7.4)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Upper Shock absorber has a slightly worn bush (2.7.4)
Nearside Front Direction indicators not working (1.4.A.2c)
Nearside Front Headlamp aim too low (1.8)
Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
Nearside Rear Upper Shock absorber has a slightly worn bush (2.7.4)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front position lamp(s) not in good working order (function impaired) (1.1.4a)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Stop lamp not working (1.2.1b)
Offside Rear Upper Shock absorber has a slightly worn bush (2.7.4)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim too high (1.8)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
ADVANCED CORROSION AFFECTING VEHICLE STRUCTURE.
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Brakes imbalanced across an axle (3.7.B.5b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.B2)
Nearside Front brake disc slightly pitted (3.5.1h)
Offside Front Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.B2)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front brake disc slightly pitted (3.5.1h)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R623 NBU is a 1998 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 13 MOT tests with a personal pass rate of 53.8%.
Across all 1998 Ford Ka models, the average MOT pass rate is 62.2% with a typical mileage of 62,348 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying R623 NBU, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 28 years old, this Ford Ka is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of R623 NBU?
You can check the full history of R623 NBU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R623 NBU registered?
R623 NBU is a 1998 Ford Ka, first registered on 24 July 1998.
Is R623 NBU safe to buy?
The MOT history for R623 NBU shows 13 tests with a 53.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R623 NBU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R623 NBU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.