1998 Mazda Friendee

Both inner sills scabby

Headlamp lens slightly defective Both (4.1.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Underside has age related corrosion or has has welding repairs done

Oil leak, but not excessive (8.4.1 (a) (i))

Underside has age related corrosion or has has welding repairs done

Windscreen washer provides insufficient washer liquid (3.5 (a))

Windscreen wiper does not clear the windscreen effectively Both (3.4 (b) (ii))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Electrical wiring inadequately secured fog light / underneath. (4.11 (a) (i))

Nearside Front Inner wheel arch corroded and holed.

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill area. (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area. (5.3.6 (a) (i))

Offside Vehicle structure excessively corroded within 30cm of towbar mounting chassis rail. (6.1.6 (i) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Electrical wiring inadequately secured fog light / underneath. (4.11 (a) (i))

Nearside Front Inner wheel arch corroded and holed.

Nearside Vehicle structure slightly corroded within 30cm of towbar mounting chassis rail. (6.1.6 (i) (i))

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced wheel arch corroded under battery tray strength not significantly reduced (6.1.1 (c) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Outer Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Exhaust mounting defective (6.1.2 (a))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Outer Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

under trays fitted obscuring some components

Windscreen washer not working (3.5 (a))

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

under trays fitted obscuring some components

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced wheel arch corroded under battery tray strength not significantly reduced (6.1.1 (c) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Outer Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Exhaust mounting defective (6.1.2 (a))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced sill corroded rear inner face (6.1.1 (c) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Outer Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement Both 'd' bushes (5.3.4 (a) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security SILLS AND N/S/F INNER WING UNDER BATTERY TRAY AND BATTERY TRAY (6.2.2 (d) (i))

Nearside Front 1 of 2 Bolt missing for bull bar mounting

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing outer side wall has slight damage and small scrapes/cuts (5.2.3 (d) (ii))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Tyre has a cut but not deep enough to reach the ply or cords age cracking badly (5.2.3 (d) (i))

Offside Rear Tyre slightly damaged/cracking or perishing age cracking (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing age cracking (5.2.3 (d) (ii))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Oil leak, but not excessive engine and gearbox area (8.4.1 (a) (i))

Rear Exhaust mounting defective mounting split and badly deteriorated (6.1.2 (a))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Exhaust mounting defective ONE OF THE REAR SILENCER MOUNTING RUBBERS STARTING TO BREAK UP (6.1.2 (a))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement SLIGHT PLAY D BUSH (5.3.4 (a) (i))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords CUTS TO OUTSIDE OF TYRE SIDE WALL (5.2.3 (d) (i))

Nearside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced SILL IS CORRODED AND WEAK. (6.1.1 (c) (i))

Nearside Rear Lower Shock absorbers has a slightly worn bush BUSH HAS SLIGHT PLAY (5.3.2 (c))

Nearside Rear Tyre slightly damaged/cracking or perishing SLIGHT AGE CRACKING (5.2.3 (d) (ii))

ONE OF THE MOUNTING BOLTS MISSING N/S FOR THE FRONT BULL BAR

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement SLIGHT PLAY IN D BUSH (5.3.4 (a) (i))

Offside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced SILL CORRODED AND WEAK (6.1.1 (c) (i))

Offside Rear Lower Shock absorbers has a slightly worn bush BUSH HAS SLIGHT PLAY (5.3.2 (c))

Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL HAS CORRODED AND HOLED (6.1.1 (c) (i))

Nearside Rear Anti-roll bar pin or bush excessively worn D BUSH (5.3.4 (a) (i))

Offside Rear Anti-roll bar pin or bush excessively worn D BUSH (5.3.4 (a) (i))

Exhaust mounting defective ONE OF THE REAR SILENCER MOUNTING RUBBERS STARTING TO BREAK UP (6.1.2 (a))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement SLIGHT PLAY D BUSH (5.3.4 (a) (i))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords CUTS TO OUTSIDE OF TYRE SIDE WALL (5.2.3 (d) (i))

Nearside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced SILL IS CORRODED AND WEAK. (6.1.1 (c) (i))

Nearside Rear Lower Shock absorbers has a slightly worn bush BUSH HAS SLIGHT PLAY (5.3.2 (c))

Nearside Rear Tyre slightly damaged/cracking or perishing SLIGHT AGE CRACKING (5.2.3 (d) (ii))

ONE OF THE MOUNTING BOLTS MISSING N/S FOR THE FRONT BULL BAR

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement SLIGHT PLAY IN D BUSH (5.3.4 (a) (i))

Offside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced SILL CORRODED AND WEAK (6.1.1 (c) (i))

Offside Rear Lower Shock absorbers has a slightly worn bush BUSH HAS SLIGHT PLAY (5.3.2 (c))

inner sills corroded

Nearside Front Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Lower Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

rear brakes low discs in poor condition

under body getting very rusty

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

under body getting very rusty

both front tyres out of shape.

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

both front tyres out of shape.

rear crossmember rusty

slight exhaust blow at centre

surface rust on front and rear suspension parts

Battery insecure (1.9.1)

Centre Statutory seat belt missing (5.1.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

surface rust on front and rear suspension parts

Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

bonnet stay insecure

front and rear suspension parts rusty

front inner brake discs rusty

glued cv boots fitted to both front outers

o/s front tyre starting to get out of shape

o/s rear tyre split and perished on outer side wall

Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

bonnet stay insecure

front and rear suspension parts rusty

front inner brake discs rusty

glued cv boots fitted to both front outers

o/s front tyre starting to get out of shape

o/s rear tyre split and perished on outer side wall

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

front brake discs rusty

rear brake pads need checking soon

slight oil weep at n/s rear hub seal

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

engine mounting bracket very rusty n/s front

engine mounting bracket very rusty n/s front

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear fog lamp not working (1.3.2b)

Rear Vehicle structure has slight corrosion (6.1.A.1)