1998 Honda CBR1100XX

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Tyre has a lump or bulge caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Drive chain slightly loose (6.1.7 (c) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Valve stem slightly damaged (5.2.3 (j))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Front tyre valve perished

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Steering movement slightly 'notchy' (2.2.1b)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Steering movement slightly 'notchy' (2.2.1b)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Steering movement slightly 'notchy' (2.2.1a)

Brake performance not tested (3.3)

Front Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Front suspension assembly component loose (2.3.1)

Headlamp aim not tested (1.6)

Roller brake test Neither brake control achieves an efficiency of 25% (3.3.A2b)

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Steering movement slightly 'notchy' (2.2.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1a)