1998 Yamaha YZF1000

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Exhaust noisy (8.1.1 (a))

Front Valve stem slightly damaged (5.2.3 (j))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Nearside Front Handlebar excessively deformed (2.2.1 (c) (i))

Nearside Front Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Nearside Rear Direction indicator missing lens missing (4.4.1 (a) (ii))

Offside Front Brake disc contaminated (1.1.14 (b))

Offside Front Brake pad(s) contaminated (1.1.13 (b))

Offside Front Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear reflector missing (4.8.2 (a) (ii))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Stop lamp not working (4.3.1 (a) (ii))

Rear Stop lamp not working (4.3.1 (a) (ii))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Nearside Handlebar deformed but serviceable (2.2.1 (c) (i))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust noisy (7.1.2)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

Drive chain worn but not considered excessive (6.2.1e)

Offside Front Front shock absorber has light misting of stanchion (2.3.3)

Exhaust noisy (7.1.2)

Rear Brake disc(s) has slight run out (3.2.A1m)

Rear Tyre worn close to the legal limit (4.1.3(ii))

repair plug in rear tyre.

Exhaust noisy (7.1.2)

Rear Brake disc(s) has slight run out (3.2.A1m)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Registration plate with character(s) which are not the correct height (6.3.4a)

Registration plate with character(s) which are not the correct width (6.3.4a)

repair plug in rear tyre.

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake disc(s) is excessively distorted (3.2.A1m)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Throttle operating incorrectly (6.2.1f)