MOT Status
ExpiredMileage
282,585 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Central Rear Upper Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge bold on inner edge (5.2.3 (e))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Integral body structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))
inner sills corroded and hole not within prescribed area
o/s/f and n/s/f bump stops missing
o/s/r bump stop missing
outer sills corroded and unable to inspect due to body filler
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner and outer sill (6.1.1 (c) (i))
Nearside Integral body structure is fractured but structural rigidity is not significantly reduced sill (6.1.1 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced inner and outer sill (6.1.1 (c) (i))
Offside Rear Integral body structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
o/s/f brake slight binding
o/s/r and n/s/r inner wheel arches corroded
Driver's view of the road through the swept area of the windscreen significantly affected by an obstruction sat nav and phone holder (3.1 (a) (ii))
Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner and outer sill (6.1.1 (c) (i))
Nearside Integral body structure is fractured but structural rigidity is not significantly reduced sill (6.1.1 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced inner and outer sill (6.1.1 (c) (i))
Offside Rear Integral body structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
bolt cross threaded in o/s/f seat base
o/s/f brake slight binding
o/s/r and n/s/r inner wheel arches corroded
both rear tyres wear inner edges slightly
nearside rear inner arch corroded
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
both front tyres wear edges slightly
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner corner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Upper Suspension component pin or bush slightly worn (5.3.4 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
nearside rear body corroded
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
all wheel arches and chassis corroded.
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill. (7.1.1 (a) (i))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill. (7.1.1 (a) (i))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
all wheel arches and chassis corroded.
Horn not loud enough to be heard by another road user (1.6.2b)
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded sill/floor (2.4.A.3)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside Front Inner Suspension component mounting prescribed area is excessively corroded sill/floor (2.4.A.3)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Headlamp not working on main beam (1.7.5a)
Offside Inner Seat belt anchorage prescribed area is excessively corroded centre sill (5.2.6)
Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Headlamp not working on main beam (1.7.5a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Nearside Rear Towbar component excessively corroded (6.6.1)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Headlamp not working on main beam (1.7.5a)
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Rear position lamp(s) not working (1.1.A.3b)
Offside Rear Stop lamp not working (1.2.1b)
Offside Rear Towbar component excessively corroded (6.6.1)
Rear fog lamp insecure (1.3.2a)
Rear fog lamp not working (1.3.2b)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Nearside Inner Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Outer Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Inner Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Outer Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
all brake discs worn x4
Centre Front Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Front Upper Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Lower Rear fog lamp not working (1.3.2b)
Rear Registration plate lamp not working (1.1.C.1d)
Centre Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Inner Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Outer Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Inner Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Outer Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
all brake discs worn x4
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Outer Tyre worn close to the legal limit (4.1.E.1)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Outer Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
front lower cross member rusty
Nearside Inner Front Lower Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Outer Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Exhaust has a major leak of exhaust gases (7.1.2)
Offside Inner Front Lower Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Rear Lower Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Rear Lower Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Outer Tyre worn close to the legal limit (4.1.E.1)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Outer Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
front lower cross member rusty
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Service brake: efficiency below requirements (3.7.C.1a)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Brake pad(s) wearing thin (3.5.1g)
rear brake disc's worn
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Parking brake lever has no reserve travel (3.1.6b)
rear brake disc's worn
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear fog lamp not working (1.3.2b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear fog lamp not working (1.3.2b)
Offside Registration plate lamp not working (1.1.5c)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Rear fog lamp missing (1.3.2a)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R670 VOD is a 2008 Mazda Bongo in White with a 2,490cc diesel engine. This vehicle has been through 27 MOT tests with a personal pass rate of 51.9%.
Across all 2008 Mazda Bongo models, the average MOT pass rate is 66.5% with a typical mileage of 139,328 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying R670 VOD, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 18 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of R670 VOD?
You can check the full history of R670 VOD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R670 VOD registered?
R670 VOD is a 2008 Mazda Bongo, first registered on 5 February 2008.
Is R670 VOD safe to buy?
The MOT history for R670 VOD shows 27 tests with a 51.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R670 VOD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R670 VOD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.