2010 Ford Freda

Brake pedal wearing smooth (1.1.2 (c))

Offside Front A pillar corroded.

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Cross member (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Cross member (5.3.6 (a) (i))

Brake pedal wearing smooth (1.1.2 (c))

Nearside Rear Cross member corroded/holed.

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Sill end/inner wheel arch. (5.3.6 (a) (i))

Offside Front A pillar corroded.

Offside Rear Outer Sill corroded/holed.

Oil leak, but not excessive (8.4.1 (a) (i))

Brake pedal wearing smooth (1.1.2 (c))

Front Cross-member corroded

Offside Rear Outer sill holed/corroded

Oil leak, but not excessive Engine and Transmission (8.4.1 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Vehicle structure excessively corroded within 30cm of towbar mounting Rear bumper support x2 holes (6.1.6 (i) (i))

Brake pedal wearing smooth (1.1.2 (c))

Front Cross-member corroded

Offside Rear Outer sill holed/corroded

Oil leak, but not excessive Engine and Transmission (8.4.1 (a) (i))

Central Exhaust has a minor leak of exhaust gases flexi (6.1.2 (a))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Inner Wing corroded/holed.

Nearside Inner Sill corroded/holed x2

Nearside Rear Inner Wheel arch-cross member corroded/holed.

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Sill (5.3.6 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Rear fog lamp not working (4.5.1 (a) (ii))

Central Exhaust has a minor leak of exhaust gases flexi (6.1.2 (a))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Inner Wing corroded/holed.

Nearside Inner Sill corroded/holed x2

Nearside Rear Inner Wheel arch-cross member corroded/holed.

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced multiple corrosion holes in nearside inner sill, not in prescribed areas (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive corroded spring mount/inside centre of spring (5.3.6 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing perished (5.2.3 (d) (ii))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive corroded spring mount/inside centre of spring (5.3.6 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing perished (5.2.3 (d) (ii))

Prop shaft joint worn, but not excessively front prop u/j slight play (6.1.7 (c) (i))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills holed, has had a bad repair before that's peeling off inner sill (5.3.6 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced multiple corrosion holes in nearside and offside inner sills, not in prescribed areas (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive corroded spring mount/inside centre of spring (5.3.6 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing perished (5.2.3 (d) (ii))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge tread depth just over 2mm and tyre heavily perished (5.2.3 (e))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive corroded spring mount/inside centre of spring (5.3.6 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing perished (5.2.3 (d) (ii))

Prop shaft joint worn, but not excessively front prop u/j slight play (6.1.7 (c) (i))

Both headlamps faded.

Nearside Inner Sill rusty/holed

Nearside Rear Cross member rusty

Offside Inner Sill rusty/holed

Offside Rear Chassis rail rusty.

Offside Rear Outer Sill rusty/holed

Rear Both coil spring mounts rusty.

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill in two places. (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill end. (5.3.6 (a) (i))

Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting Cross member (6.1.6 (i) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Both headlamps faded.

Nearside Inner Sill rusty/holed

Nearside Rear Cross member rusty

Offside Inner Sill rusty/holed

Offside Rear Chassis rail rusty.

Offside Rear Outer Sill rusty/holed

Rear Both coil spring mounts rusty.

Rear chassis is corroded

inner and outer sills are corroded

Inner Both sills rusty/holed.

Nearside Rear Cross member rusty.

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Both chassis rails rusty.

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Cross member. (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch. (5.3.6 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Towbar fractured seriously affecting its strength within 30cm of towbar mounting Cross member. (6.1.6 (i) (i))

Inner Both sills rusty/holed.

Nearside Rear Cross member rusty.

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Both chassis rails rusty.

N/s centre and front inner sill areas corroded ( not prescibed area)

O/s/ front and centre inner sills corroded not within prescribed area

O/s/r inner sill corroded around heater area.

Nearside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded sill end under wheel arch (2.4.A.3)

N/s centre and front inner sill areas corroded ( not prescibed area)

O/s/ front and centre inner sills corroded not within prescribed area

O/s/r inner sill corroded around heater area.

Nearside corrosion x2 outside prescribed areas on inner sill

Offside corrosion x2 outside prescribed areas on inner sill

corrosion just outside offside front suspension mount

corrosion just outside pescribed area nearside front suspension mount

corrosion outside pescribed areas nearside inner sill

corrosion outside pescribed areas offside inner sill

Fuel cap/sealing device missing (7.2.4a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)

corrosion just outside offside front suspension mount

corrosion just outside pescribed area nearside front suspension mount

corrosion outside pescribed areas nearside inner sill

corrosion outside pescribed areas offside inner sill

one area of corrosion outside of prescribed area N/S inner sill

two areas of corrosion outside of prescribed areas O/S inner sill

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

one area of corrosion outside of prescribed area N/S inner sill

two areas of corrosion outside of prescribed areas O/S inner sill

Exhaust has a minor leak of exhaust gases (7.1.2)

corrosion outside pescribed area n/s inner sill

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Stop lamp not working (1.2.1b)

corrosion outside pescribed area n/s inner sill

corrosion outside pescribed areas n/s inner sill

surface corrosion n/s sill

surface corrosion o/s sill

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

inner sill centre rusty.