MOT Status
ExpiredMileage
42,579 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Offside Stop lamp not working (1.2.1b)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Rear Brake hose excessively deteriorated (3.6.B.4d)
both wishbone rear bushes spliting
corrosion all under vehicle and to both inner and outer sills
nearside front tyre cracking
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Bonded suspension unit deteriorated and cannot function as intended (2.4.F.3)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Tyre has ply or cords exposed (4.1.D.1b)
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Rear Exhaust system not adequately supported (7.1.1)
Steering system has excessive free play detected at the steering wheel (steering rack fitted) (2.2.A.1b)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Lower Steering column universal joint has excessive play (2.1.5)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside rear brake recording little or no effort (3.7.B.5a)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Steering system has excessive free play detected at the steering wheel (steering rack fitted) (2.2.A.1b)
rear brake application uneven (3.7.B.2)
rear brakes release unevenly (3.7.B.4)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Front number plate cracked.
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Lower Steering column universal joint has excessive play (2.1.5)
Nearside Front Direction indicator not working (1.4.A.2c)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Registration plate lamp not working (1.1.5c)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
front numberplate cracked but secure
rear tyres low on edge
Nearside Front Bonded suspension unit bonding failed and part of unit is likely to become displaced (2.4.F.2)
Nearside Front Fluid suspension unit leaking (2.4.D.2)
Nearside Rear Suspension arm worn and seriously weakened (2.4.G.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Bonded suspension unit bonding failed and part of unit is likely to become displaced (2.4.F.2)
Offside Front Fluid suspension unit leaking (2.4.D.2)
Offside Rear Suspension arm worn and seriously weakened (2.4.G.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
R686 NWY is a 1998 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 12 MOT tests with a personal pass rate of 50%.
Across all 1998 Ford Ka models, the average MOT pass rate is 62.2% with a typical mileage of 62,348 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying R686 NWY, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 28 years old, this Ford Ka is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of R686 NWY?
You can check the full history of R686 NWY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was R686 NWY registered?
R686 NWY is a 1998 Ford Ka, first registered on 27 June 1998.
Is R686 NWY safe to buy?
The MOT history for R686 NWY shows 12 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does R686 NWY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on R686 NWY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.