1998 Renault Clio

Child seat fitted not allowing full inspection of adult belt

Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear coil spring corroded (2.4.C.1b)

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front coil spring incomplete (2.4.C.1a)

Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Child seat fitted not allowing full inspection of adult belt

Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear coil spring corroded (2.4.C.1b)

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Brake load sensing valve linkage stiff (3.6.E.3)

Coolant leak

Nearside Stop lamp not working (1.2.1b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

handbrake travel

headlights slightly deteriorated

rear exhaust slightly deteriorated

rear no.plate slightly deteriorated

Brake load sensing valve linkage stiff (3.6.E.3)

Coolant leak

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

handbrake travel

headlights slightly deteriorated

rear exhaust slightly deteriorated

rear no.plate slightly deteriorated

Nearside Rear Braking system leaking (3.6.A.1)

Nearside rear brake recording little or no effort (3.7.B.5a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Anti-roll bar linkage rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

Brake load sensing valve linkage stiff (3.6.E.3)

Nail in nearside rear tyre

Nearside Headlamp not in good working order but not adversely affecting beam image (1.2.4a)

Nearside Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)

Offside Headlamp not in good working order but not adversely affecting beam image (1.2.4a)

Offside Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Steering rack gaiter split (2.2.D.2d)

Offside Front coil spring cracked (2.4.C.1a)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc excessively pitted (3.5.1h)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)