1998 Suzuki Bandit

Front brake fluid low

Wheel alignment slightly misaligned (2.4 (a))

All direction indicators not working (4.4.1 (a) (ii))

All position lamps not working (4.2.1 (a))

Headlamp aim too low (4.1.2 (a))

Rear Brake performance unable to be tested (1.2.1 (g))

Rear Stop lamp not working (4.3.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) DANGEROUS

Rear Brake caliper inadequately mounted and braking performance affected (1.1.16 (c) (ii)) DANGEROUS

Rear Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) DANGEROUS

Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Rear Brake pad(s) missing (1.1.13 (c)) DANGEROUS

Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) DANGEROUS

Front fluid level low

Wheel alignment slightly misaligned borderline (2.4 (a))

Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))

Stop lamp not working (4.3.1 (a) (ii))

Drive chain slightly loose (6.2.1d)

Front Roller brake test indicates a severely grabbing brake (3.3.A1b)

Fuel system component insecure Fuel Tank Insecure (7.2.1b)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Drive chain excessively loose (6.2.1d)

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust noisy (7.1.2)

Front Tyre valve stem slightly damaged (4.1.2c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front wheel bearings have slight free play (2.3.5b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering headbearing has slight free play (2.2.2)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)