1999 Yamaha R6

Drive chain slightly loose (6.2.1d)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Direction indicators flashing more than 120 times per minute (1.5.1c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain slightly loose (6.2.1d)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Offside Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Exhaust noisy (7.1.2)

Fairings insecure but not likely to impede the steering (2.1.2e)

Offside Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear suspension bush has slight free play (2.4.A2a(i))

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear mono-shock pivot worn but not excessive (2.4.B.4)

Rear reflector on motorcycle missing (1.4.1)

Rear suspension bush has slight free play (2.4.A2a(i))

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear mono-shock pivot worn but not excessive (2.4.B.4)

Rear suspension bush has slight free play (2.4.A2a(i))

Offside Inner Front Front position lamp does not illuminate immediately when switched on (1.1.3a)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Front wheel bearings are excessively rough (2.3.5b)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Wheel has an excessively distorted bead rim. (4.2.2)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Drive chain worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear wheel bearings have slight free play (2.4.A.2c)