2000 Yamaha R6

Rear Exhaust noisy Aftermarket silencer fitted (8.1.1 (a))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps Rear number plate lamp does not work (4.7.1 (b) (ii))

Rear Exhaust noisy Aftermarket silencer fitted (8.1.1 (a))

Rear Registration plate does not conform to the specified requirements Number plate does not conform (0.1 (d))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake lining(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Rear reflector on motorcycle missing (1.4.1)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Tyre worn close to the legal limit (4.1.3(ii))

Offside Rear Direction indicator slightly discoloured (1.5.1b)

Rear Outer Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Tyre worn close to the legal limit (4.1.3(ii))

Offside Headlamp aim too low (1.6)

Offside Rear Direction indicator slightly discoloured (1.5.1b)

Rear Outer Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Drive chain slightly loose (6.2.1d)

Rear suspension bush has slight free play (2.4.A2a(i))

Direction indicator not working (1.5.1c)

Registration plate incorrect (6.3.1a)

Rear suspension bush has slight free play (2.4.A2a(i))

Direction indicators not working (1.5.1c)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Motorcycle structure cracked (6.1.1a)

Front Roller brake test indicates a binding brake (3.3.A1a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear reflector on motorcycle missing (1.4.1)

Registration plate with character(s) which are not of equal width along their entire length (6.3.4a)

front pads very rusty

Nearside Rear Direction indicator not working (1.5.1c)

Rear Brake disc(s) cracked (3.2.A1g)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Indicator tell tale not operating correctly (1.5.2)

Nearside Headlamp aim too high (1.6)

Offside Headlamp aim too high (1.6)

Rear reflector on motorcycle incorrectly positioned (1.4.2d)

Registration plate character(s) not correctly formed (6.3.4b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Drive chain worn but not considered excessive (6.2.1e)

Upper Rear suspension bush has slight free play (2.4.A2a(i))

Front Direction indicator not working (1.5.1c)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp aim too high (1.6)

Nearside Steering lock stop ineffective (2.1.3)

Rear Direction indicator not working (1.5.1c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear reflector on motorcycle missing (1.4.1)

Drive chain worn but not considered excessive (6.2.1e)

Upper Rear suspension bush has slight free play (2.4.A2a(i))

Drive chain worn but not considered excessive (6.2.1e)

Rear wheel bearings have slight free play (2.4.A.2c)

Rear suspension bearing has excessive free play (2.4.A2a(i))

NUMBER PLATE NOT STANDARD SIZE