1997 Rover 618

Central Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)

Covers fitted over outer sills restricting inspections of testable areas

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Upper Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing/flitch (2.4.A.3)

Offside Rear Nail in tyre ()

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Upper Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Supplementary Restraint System warning lamp does not illuminate (5.4.2)

both rear tyre perishing/cracking on tread

parking brake efficiency only just met the minimum requirements

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Registration plate lamp not working (1.1.C.1d)

Central Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)

Covers fitted over outer sills restricting inspections of testable areas

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Upper Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing/flitch (2.4.A.3)

Offside Rear Nail in tyre ()

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Upper Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Supplementary Restraint System warning lamp does not illuminate (5.4.2)

both rear tyre perishing/cracking on tread

parking brake efficiency only just met the minimum requirements

Covers fitted over outer sills restricting inspections of testable areas

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing/flitch (2.4.A.3)

Offside Front Upper Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

all tyres lightly perishing/cracking on tread

plastic sill covers fitted

exhaust heat shield corroded

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Oil leak

slight corrosion at o/s/f inner wing and rear inner wings corroded

Front Brakes imbalanced across an axle (3.7.B.5b)

Offside front brake recording little or no effort (3.7.B.5a)

Oil leak

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

exhaust heat shield corroded

plastic sill covers fitted

slight corrosion at o/s/f inner wing and rear inner wings corroded

Brakes imbalanced across an axle (3.7.B.5b)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside rear brake recording little or no effort (3.7.B.5a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Shock absorber has a slightly reduced damping effect (2.7.5)

Offside Front Shock absorber has a slightly reduced damping effect (2.7.5)

advise n/s wiper blade fitted

slight blow on exhaust middle box to cat and cat heat shield corroded

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

o/s rear brake back plate starting to corrode

Nearside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim too high (1.8)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

o/s rear brake back plate starting to corrode

both front shock absorbers weak

front number plate damaged

nearside front tyre wearing inner edge & 3mm

offside front tyre worn bold inner edge & 2mm

slight exhaust leak from rear catalyst joint

Front Headlamp aim too high (1.8)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Stop lamp not working (1.2.1b)

Nearside rear brake binding (3.7.B.1)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Stop lamp not working (1.2.1b)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

both front shock absorbers weak

front number plate damaged

nearside front tyre wearing inner edge & 3mm

offside front tyre worn bold inner edge & 2mm

slight exhaust leak from rear catalyst joint

o/s/r tyre wearing on edge

Nearside Front Mechanical brake component has restricted free movement (3.5.1k)

Offside Front Mechanical brake component has restricted free movement (3.5.1k)

Offside Headlamp insecure (1.7.3)

Parking brake lever has no reserve travel (3.1.6b)

o/s/r tyre wearing on edge

Exhaust centre pipe heavily corroded

Front number plate cracked

General corrosion to underneath of vehicle

Nearside Headlamp aim too low (1.8)

Exhaust centre pipe heavily corroded

Front number plate cracked

General corrosion to underneath of vehicle

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Headlamp aim too high (1.8)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

track.req.adjusting