1997 Fiat Ducato

Nearside Front Inner Vehicle structure is deformed and structural rigidity is significantly reduced Sill / chassis folded (6.1.1 (a) (i))

Nearside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Box section of chassis (Tow) (6.1.1 (c) (i))

Electrical wiring inadequately secured under drivers floor area , and some under engine area (4.11 (a) (i))

numerous areas of sills and underbody rusting / previously repaired

some play in off side rear wheel bearing

Hydraulic brake cylinder leaking hydraulic fluid rear compensator (1.1.16 (b) (i))

Subframe mounting prescribed area excessively corroded significantly reducing structural strength off side front chassis rail area behind rear wards of subframe (5.3.6 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength off side front inner turret area outer face (5.3.6 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outside of near side front chassis rail area inside inner wheel arch (5.3.6 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outside of off side front chassis rail area inside inner wheel arch (5.3.6 (a) (i))

Electrical wiring inadequately secured under drivers floor area , and some under engine area (4.11 (a) (i))

numerous areas of sills and underbody rusting / previously repaired

some play in off side rear wheel bearing

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

corrosion to offside front chassis rail

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

corrosion to offside front chassis rail

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.2.2 (a) (i))

heavy corrosion to offside front chassis

Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

heavy corrosion to offside front chassis

Brake hose has slight corrosion to ferrule all brake ferrule (1.1.12 (f) (i))

Exhaust mounting defective (6.1.2 (a))

Horn not working (7.7 (a))

Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front crossmeber (6.1.1 (c) (i))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Rear Service brake excessively fluctuating (1.2.1 (e))

Service brake efficiency below requirements (1.2.2 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Brake hose has slight corrosion to ferrule all brake ferrule (1.1.12 (f) (i))

Exhaust mounting defective (6.1.2 (a))

Nearside Windscreen wiper blade defective (3.4 (b) (i))

Offside Windscreen wiper blade defective (3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust system insecure due to rubber mounts missing and deteriorated (6.1.2 (a))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step section excessively coroded (7.1.1 (a) (i))

Nearside Front Side repeater not working (4.4.1 (a) (ii))

Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Front Upper Outline marker lamp missing (4.2.1 (a) (ii))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced step section excessively coroded (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg excessively coroded (5.3.6 (a) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust mounting defective (6.1.2 (a))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

General underside corrosion

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Horn not working (7.7 (a) (ii))

Exhaust mounting defective (6.1.2 (a))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

General underside corrosion

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Nearside top side marker damaged

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

exhaust mount missing but exhaust still secure

general underside corrosion

rear brake fluctuating, but not excessively both (3.7.B.3)

Nearside Front Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Headlamp aim too low (1.8)

Nearside Stop lamp not working (1.2.1b)

Offside Steering rack gaiter split (2.2.D.2d)

Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Nearside top side marker damaged

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

exhaust mount missing but exhaust still secure

general underside corrosion

rear brake fluctuating, but not excessively both (3.7.B.3)

both rear wheel bearings have slight play

Nearside Headlamp aim too low (1.8)

Offside Front Sub-frame insecure bolt loose (2.4.G.1)

Offside Headlamp aim too low (1.8)

Power steering component(s) leaking joint on rack (2.3.3b)

Power steering fluid level below minimum (2.3.1)

Service brake: efficiency below requirements (3.7.B.7)

both rear wheel bearings have slight play

Battery insecure (1.9.1)

Horn not working (1.6.2a)

Nearside Front Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Nearside Rear Suspension has inadequate clearance with the bump stop (2.4.A.1a)

Offside Front Subframe mounting prescribed area is excessively corroded front chassis (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded wheel arch (2.4.A.3)

Offside Rear Suspension has inadequate clearance with the bump stop (2.4.A.1a)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

both door steps starting to corrode

offside front inner wing corroding

Battery insecure

Offside Front Vehicle structure has slight corrosion (6.1.A.1)

powersteering pipes corroding

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside front brake binding (3.7.B.1)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Rear wheel bearing has slight play (2.6.2)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Offside Rear Rear wheel bearing has slight play (2.6.2)

p.a.s pipes on steering rack have surface corrosion

Exhaust has a major leak of exhaust gases (7.1.2)

Front Brake pipe excessively corroded (3.6.B.2c)

Horn not loud enough to be heard by another road user (1.6.2b)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

offside rear high level marker lamp is broken.

p.a.s pipes on steering rack have surface corrosion.

rear leaf spring hangers are corroding.

both steering hydraulic pipes corroded

Fuel system component leaking (7.2.3)

Nearside Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.B2)

both steering hydraulic pipes corroded