1997 Honda VTR1000 F

Rear Brake effort inadequate at a wheel not locking out (1.2.1 (a) (i))

Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Nearside Rear Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Offside Front Tyre tread not clearly visible (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread not clearly visible (5.2.3 (e)) DANGEROUS

throtle sticks when reved up

Central Rear Drive chain slightly loose (6.2.1d)

Front Brake lever has inadequate reserve travel (3.1.3b)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Offside Front Footrest insecure (6.2.1a)

Rear position lamp insecure (1.1.1c)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

rear suspension slightly stiff

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear wheel bearings have excessive free play (2.4.A.2c)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear suspension bearing has slight free play (2.4.A2a(i))

Nearside Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Drive chain fouling another component (6.2.1d)

Rear reflector on motorcycle missing (1.4.1)

Exhaust markings indicating not for road use or similar wording (7.1.4)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp aim too low (1.6)

Nearside Rear Footrest missing (6.2.1a)

Offside Rear Footrest missing (6.2.1a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Registration plate insecure (6.3.1b)

Front Roller brake test indicates a binding brake (3.3.A1a)

Nearside Front Fairings insecure but not likely to impede the steering (2.1.2e)

Rear Exhaust noisy (7.1.2)