1998 Honda XLR125R

Brake lever worn, but not excessively clutch leaver ball missing (1.1.15 (b))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

oil leak

Motorcycle structure joining/attachment plate or fastening insecure battery (6.1.1 (b) (i))

Rear Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Registration plate inscription illegible cant see right from behind (0.1 (b))

Brake lever worn, but not excessively clutch leaver ball missing (1.1.15 (b))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

oil leak

Led lights fitted front and rear

Speedo fitted loosely secured and not connected

Drive chain worn to excess (6.1.7 (c) (i))

Lower Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Upper Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Front Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Front Engine mounting bolt missing

Front Brake binding but not excessively very slight brake bind (1.2.1 (f))

Front Brake binding but not excessively very slight brake bind (1.2.1 (f))

Nearside Rear Outer Drive chain horseshoe locking device incorrectly fitted now fitted correctly (6.1.7 (j) (i))

No Number plate light

Speedometer missing

Split link weak

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear reflector on motorcycle missing (1.4.1)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Stop lamp emits other than a steady red light (1.3.1b)

Headlamp switch faulty (1.2.4)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear reflector on motorcycle missing (1.4.1)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp aim too high and too far to the left. (1.6)

Rear Rear reflector on motorcycle missing (1.4.1)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front wheel bearings are slightly rough (2.3.5b)

Front Brake disc(s) cracked (3.2.A1g)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Front Tyre worn close to the legal limit (4.1.3(ii))

Drive chain worn to excess (6.2.1e)

Front Floor brake test indicates a binding brake (3.3.C2c)

Front Roller brake test indicates a severely grabbing brake (3.3.A1b)

Front wheel bearings have excessive free play (2.3.5b)

Horn not working (1.7.3a)

Rear Chain guard insecure (6.2.1c)

Rear Exhaust is leaking and excessively noisey (7.1.1b)

Rear Rear reflector on motorcycle missing (1.4.1)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front Tyre worn close to the legal limit (4.1.3(ii))