1998 Yamaha DT125

Rear brake pedal has little reserve travel

Brake pedal has insufficient reserve travel (1.1.2 (a))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Stop lamp not working (4.3.1 (a) (ii))

All direction indicators flashing more than 120 times a minute (4.4.4 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement shock bottom bush (5.3.4 (a) (i))

Rear Shock absorber has a light misting of oil (5.3.2 (b))

day time used only

Brake lever is short but brake can still be readily applied (3.1.3c)

Chain guard missing

Clutch lever shortened. (6.2.1g)

Rear mono-shock pivot worn but not excessive (2.4.B.4)

Nearside Front Direction indicator incorrect colour (1.5.1b)

Offside Front Direction indicator incorrect colour (1.5.1b)

Rear Direction indicator insecure (1.5.3b)

Rear position lamp insecure (1.1.1c)

Registration plate insecure (6.3.1b)

Brake lever is short but brake can still be readily applied (3.1.3c)

Chain guard missing

Clutch lever shortened. (6.2.1g)

Rear mono-shock pivot worn but not excessive (2.4.B.4)

Clutch lever shortened. (6.2.1g)

Lower Rear suspension bush has slight free play (2.4.A2a(i))

Offside Rear Brake disc(s) slightly worn (3.2.A1l)

Rear shock absorber has a light misting (2.4.A.1c)

Direction indicator missing (1.5.1a)

Front Front wheel bearings are excessively rough (2.3.5b)

Front Wheel has an excessively distorted bead rim. (4.2.2)

Front position lamp deteriorated and function impaired (1.1.1b)

Headlamp missing (1.2.3a)

Headlamp missing (1.2.3a)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Position lamp switch faulty (1.1.4a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Footrest missing (6.2.1a)

Rear Wheel spoke excessively loose (4.2.1b)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear position lamp insecure (1.1.1c)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Clutch lever shortened. (6.2.1g)

Rear shock absorber has a light misting (2.4.A.1c)

Rear suspension bush has slight free play (2.4.A2a(i))

Drive chain worn but not considered excessive (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear reflector on motorcycle missing (1.4.1)

Chain guard missing

Clutch lever shortened. (6.2.1g)

Drive chain slightly tight (6.2.1d)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear suspension bush has slight free play (2.4.A2a(i))

no speedo

swing arm bolt defect

Front Direction indicator missing (1.5.1a)

Headlamp aim headlamp deteriorated and function impaired (1.2.3a)

Headlamp aim too low (1.6)

Rear Direction indicator missing (1.5.1a)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear reflector on motorcycle missing (1.4.1)

Registration plate character(s) likely to be misread (6.3.4b)

Registration plate deteriorated (6.3.1d)

Registration plate insecure (6.3.1b)

Brake pedal pivots excessively worn (3.1.3a) DANGEROUS

Fuel pipe leaking (7.2.1a) DANGEROUS

Horn not loud enough to be heard by another road user (1.7.3a) DANGEROUS

Offside Front shock absorber seal failed and leaking oil (2.3.3) DANGEROUS

Chain guard missing

Clutch lever shortened. (6.2.1g)

Drive chain slightly tight (6.2.1d)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear suspension bush has slight free play (2.4.A2a(i))

no speedo

swing arm bolt defect

Registration plate with character(s) which are not the correct height (6.3.4a)

Registration plate with character(s) which are not the correct width (6.3.4a)

Front Front wheel bearings have excessive free play (2.3.5b)

Rear Brake disc(s) excessively worn (3.2.A1l)

Rear Rear mono-shock pivot excessively worn (2.4.B.4)

Rear Stop lamp affected by the operation of another lamp (1.3.2)

Rear Rear suspension bearing has excessive free play (2.4.A2a(i))

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a)